TwinBed II ® Mounting Plates and LNI Injectors
Sheet 4343-12
MOUNTING PLATE AND INJECTOR ORDERING INFORMATION
4343- -MP-L
4343- -MP-R
Injector shown in 60° location
Injector shown in 300° location
Burner
Right-Hand Mounting Plate
Left-Hand Mounting Plate
Size
4343-7-MP-R 4343-7-MP-R 4343-8A-MP-R 4343-8B-MP-R 4343-9-MP-R 4343-10-MP-R 4343-12A-MP-R 4343-12B-MP-R 4343-14-MP-R Part Number
Injector Location
Part Number
Injector Location
4343-7-INJ 4343-7-INJ LNI Injector 4343-8-A/INJ 4343-8-B/INJ 4343-9-INJ 4343-10-INJ 4343-12-A/INJ 4343-12-B/INJ 4343-14-INJ
4343-7-A 4343-7-B 4343-8-A 4343-8-B 4343-9 4343-10 4343-12-A 4343-12-B
90 degrees 90 degrees 90 degrees 90 degrees 60 degrees 60 degrees 60 degrees 60 degrees 60 degrees
4343-7-MP-L 4343-7-MP-L 4343-8A-MP-L 4343-8B-MP-L 4343-9-MP-L 4343-10-MP-L 4343-12A-MP-L 4343-12B-MP-L 4343-14-MP-L
270 degrees 270 degrees 270 degrees 270 degrees 300 degrees 300 degrees 300 degrees 300 degrees 300 degrees
4343-14
The above injector part numbers are used for quoting and order entry only. Part numbers specific to the injector length and nozzle bore are to be provided by North American Engineering.
Injector location is measured clockwise from the vertical burner centerline. Consult North American Engineering for mounting plates with injector locations other than those listed.
Mounting plate part numbers are configurable. Part numbers are to be configured after order entry with information provided by North American Engineering.
Made with FlippingBook flipbook maker