4343-12 page 2
MOUNTING PLATE AND INJECTOR SPARE PARTS AND INSTALLATION INSTRUCTIONS
See detail A
12.00 inch (305 mm) ceramic fiber blanket
Tag bar must point toward burner centerpoint
½ inch (12.7 mm) recess
Burner centerpoint
Injector packing
Mounting plate seal
Tag bar
Mounting coupling
Detail A
Section A-A
INSTALLATION INSTRUCTIONS
1. Wrap end of injector with ceramic fiber blanket (1), secure and compress with tape and insert through furance wall. 2. Wrap injector packing (enclosed) around injector and pack into injector mounting coupling (2). 3. Loosen bolts on injector bushing, (3) thread and tighten bushing into mounting coupling (2). 4. Adjust injector insertion so that nozzle is recessed ½ ” (13 mm) into refractory (4), measure from the hot face. 5. Point tag bar on the injector toward the burner centerpoint to ensure proper nozzle orientation. 6. Tighten bolts on injector bushing (3) previously loosened in step 3.
DIMENSIONS SHOWN ARE SUBJECT TO CHANGE. PLEASE OBTAIN CERTIFIED PRINTS FROM FIVES NORTH AMERICAN COMBUSTION, INC. IF SPACE LIMITATIONS OR OTHER CONSIDERATIONS MAKE EXACT DIMENSION(S) CRITICAL .
Made with FlippingBook flipbook maker