North American 4/5/6131 Burner
Engineering Supplement 6131-2
PACKAGED BURNER ORDERING DESIGNATIONS (See Page 2 for visual representations.)
FUEL 4 - GAS 6 - DUAL-FUEL
ELECTICAL COMPONENTS and WIRING REQUIREMENTS 1 - General Purpose 4 - Weatherproof X - Other (specify)
CHAMBER PRESSURE and APPLICATION REQUIREMEN T N - Neutral or negative (0 to -0.5"wc) chamber P - Positive 0.1 to 2.0"wc) chamber X - Other (specify)
FRAME A B C CS D E FA
BASIC BURNER DESIGN
OIL GRADE 0 - Gas Only 2 - #2 Oil 4 - #4 and #5 Oil 6 - #6 Oil CR - Crude Oil
6131 - B2/P -1/ AA/ BA/ CA /DB/ EA/ FA
BLOWER MOTOR VOLTAGE AND TYPE AA - 230-460/3/60, TEFC (standard) AX - Other (specify) AZ - None
OIL PIPING FA - c/w 1 solenoid (standard)
FB - c/w 2nd solenoid FX - Other (specify) FZ - None
PILOT GAS VALVING EA - c/w 1 solenoid (standard) EB - c/w 2nd solenoid EC - c/w block and vent solenoids EX - Other (specify) EZ - None
TILE BA - Cast Refractory Tile (standard) BB - SST Jacketed Cast Refractory Tile BX - Other (specify) BZ - None
BLOWER INLET ARRANGEMENT DA - Screen (standard) DB - Silencer DC - Air Inlet Valve and Screen DD - Air Inlet Valve and Silencer DX - Other (specify)
MODULATION MOTOR CA - M9484F1007 (standard) Electric CB - 1600-2-PHL Air Motor CX - Other (specify) CZ - None
Burner comes standard with hinge interlock, combustion air interlock, and gas-electric pilot with regulator and ignition transformer wired to a NEMA 4 junction box.
See Supplement 6131-1, Table 1 for frame size and capacity reference. Oil piping Section "F" is omitted when 4131 is specified. Standard premix pilot is replaced with raw gas pilot when this option is specified on D, E, and FA burners. Specify manufacturer and model number for CX "other" motor. Check with North American, Cleveland. Specify all "X" options in detail including manufacturer and model number where applicable. Will include piping from hinge to Sensitrol valve only.
Made with FlippingBook flipbook maker