Parts List 6131G Page 5
3–7
3–9
3–8
4–8
4–10
3–10
4–11
4–9
4–7
5–10
34
2–6
5–7
5–9
3–7
3–9
3–8
34-3
30
Item no.
Part no.
Description
2–6 3–7 3–8 3–9
R310-1525* 11-4946-1 11-4945-3 11-4949-1 11-4948-1 1486A-0 8699-01-213
Heater Cable End Shutter
Middle Shutter End Shutter Shaft Middle Shutter Shaft
3–10
4–7 4–8 4–9
Pilot Solenoid Gas Valve, ¾ "
Balancing Orifice, ½ " Pilot Gas Regulator, ¾ "
7347-0-A
4–10
R300-6292
Pilot Jet Gas Gauge, 0-15 psi (Steel) or Pilot Jet Gas Gauge, 0-5 psi (Brass)
8735-Q
4–11
R930-6022 1836-03 R310-1510 R914-5702
Gauge Needle Valve, 1 / Gauge Needle Valve, 1 /
4 " (Steel) or
4 " (Brass)
5–7 5–9
Heating Tape (included in 11-5292-2 Atomizer Assembly) Oil Tube (included in 11-5292-2 Atomizer Assembly)
5–10
1821A-0
Ball Valve, ¾ " (included in 11-5292-2 and 11-5292-1 Atomizer Assembly)
30
1517U-1-CR5 1517U-1-CR6 R620-2060
1" Automatic Shutoff Oil Valve 50 Hz or 1" Automatic Shutoff Oil Valve 60 Hz
34
Fisher Positioner
34–3
1600-P
Moore Positioner (not actually pictured but location shown)
* Should be wrapped with R290-1194 Tetraglas tape 1 ½ " W 1⁄8 " thick with adhesive backing.
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
Made with FlippingBook flipbook maker