North American Flangeless Mountings for 4422/6422 Burners
Sheet 6422-5
Flangeless mountings are available for 4422, 5422, and 6422 Fire.All burners (and their 4425, etc. high temperature counterparts). They are used on tunnel kilns and other installations where it is desirable to insert the burner into a thick furnace wall.
Specify:
3-3459-1 3-4928-1
mounting for -7 and -8-A sizes
mounting for -2 through -6 sizes Flangeless mounting prices are the same as standard mountings.
A dia.
B sq.
9" standard for -2 through -6
B sq.
dimensions in inches
Mounting designation
A dia.
B* sq.
3-4928-1 3-3459-1
5 7
8 ½
10
* Opening in furnace should be about ½ " larger than dimension "B" to allow for fillets and draft on mounting plate. For other dimensions refer to the appropriate bulletin.
DIMENSIONS SHOWN ARE SUBJECT TO CHANGE. PLEASE OBTAIN CERTIFIED PRINTS FROM FIVES NORTH AMERICAN COMBUSITON, INC. IF SPACE LIMITATIONS OR OTHER CONSIDERATIONS MAKE EXACT DIMENSION(S) CRITICAL .
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker