Bulletin 5010-J Page 2
5010-J CAPACITIES vs. FLAME LENGTH/WIDTH
Capacity Table Instructions: Start with the lower bar graph and select the burner model with the desired Btu/hr capacity. Follow that capacity line vertically up to the second graph to read flame width and length.This and additional information is contained in the data table on page 2.
million Btu/hr
Flame Shape, approx. (ft)
Gas
Oxygen
Pressures ('w.c.)
Model
Capacity mm Btu/h
Nozzle Bore (")
Balancing Orifice (")
Length
Width
Gas
Oxygen
5010N-J1
0.25 0.50 0.75
0.199 0.281 0.344 0.397 0.438 0.563 0.625 0.688 0.750 0.813 0.875
0.339 0.469 0.578 0.672 0.672 0.828 0.953 1.063 0.172 1.266 0.359
4.5
0.75
27.7 27.3 29.6 33.0 11.0 12.0 13.1 15.6 18.3 21.4 25.1
0.8 2.8 6.0
5
0.8 0.9
5.5
1.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0
6
1.0 1.2 1.2 1.3 1.3 1.4 1.5 1.6
10.6
5010N-J3
7
0.1 0.3 0.5 0.7 1.0 1.3 1.7
7.5
8
8.5
9
0.5
10
WARNING : All equipment and pipe used with oxygen must be made of suitable materials and properly cleaned for oxygen service.Operating personnel should be trained in oxygen safety procedures. Failure to do so could result in accidental injury or death.Contact your oxygen supplier and Fives North American Combustion, Inc. for information.
Made with FlippingBook flipbook maker