Bulletin 5010-J Page 3
DIMENSIONS inches
G -fpt Oxygen Inlet
J
M
H -fpt Gas Inlet
K
C -dia.
Z Flange Location
B dia.
D- dia.
E -dia.
L -dia. bolt holes N -bolt circle P -no. of holes
A -dia.
¼ "
Burner
std. M
Designation
A
B
C
D
E
F
G
H
J
K
L
dim.
N
P
6
1 ¾ 3 1⁄8
1
1
6 5⁄8 7 5⁄16
2 7⁄8 3 5⁄8
30 30
4 ¾
4 8
5010N-J1 5010N-J3
1 ¼ 2 ½
4
11⁄16
½ ¾
¾ ¾
2
1 ½
7
5 3⁄8
8 ½
1 1⁄3
Combustion Block
Burner Designation
Mounting Adapter
Hanger
Q
R
S
T
U
9" sq.
13 ½ "
5010N-J1 5010N-J3
2
5.7
3
5⁄8 5⁄8
5⁄8 5⁄8
3 ½
7
4.5
Mounting Adapter Customer specifies adapter length " Y " and mounting surface angle " X ."
Hanger
Y
S (pipe size)
T
Outside block dimensions are the same for both the J1 and J3 burners.
X
Q - (bolt)
R - (nut)
U
Dimensions shown are subject to change. Certified prints are available. Burner dimensions Z, and L (if not standard length) are specified by customer. (See "Order 5010" for details.) Ordering Information: See: Order 5010.
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker