Product Overview | Flame Detector Adapters
another brand of flame detector, refer to the manufacturer’s literature to determine the flame detector’s connection type and specific thread size. Table B determines the adapter suffix based on the specific burner being used.
Adapters simplify installation of flame detectors on North American burners. They also facilitate access to detectors for servicing. Most adapters include a purge air connection. All adapters and flame detector combinations come with a means of removing the flame detector without twisting or disconnecting wires. Review the flame detector manufacturer's installation and operation literature to insure all limitations and regular maintenance are addressed when using flame detector equipment. Selection: Refer to Table A for a list of flame detectors commonly used with North American burners. Determine the adapter series number based on your specific flame detector model. If your specific model is not listed or you are using
Examples: When using a Honeywell C7027A on a 6514-4 burner, specify an 8836-D adapter.
See page 9 and 10 for Series R Adapters for smaller size flame detectors.
See Sheet 8800-1 for additional UV detector information. See Sheet 8800-2 for additional flame rod information.
Table A. Adapter Numbers for Various Honeywell, Fireye and Kromschroder Devices
Manufacturer
Mfgr's P/N
Device Connection
Device
Adapter No.
Honeywell Honeywell Honeywell Honeywell Honeywell
C7061A
¾" female NPT 1" female NPT 1" female NPT ½" female NPSM 1" female NPSM 1" female NPT 1" female NPT ½" female NPT 1" female NPT 1" female NPT ½" female NPT ½" female NPT ▲ ½" female NPT ▲
Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet Ultraviolet
8835 8837 8837 8836 8837
C7061A1046
C7061F C7027A C7035A 65UV5 95UVS2 UV7A4 UV7SC
Fireye Fireye Fireye Fireye Fireye Fireye
8837* 8837* 8836# 8837* 8837* 8836 8836 8836
UV45 UV1A
Kromschroder Kromshcroder
UVC UVS
NOTE: Some Honeywell flame detectors that do not fit or are not recommended with North American burners are: C7004B1002, 1010, and 1028, C7004B5, C7007A2, C7008A, C7009. Adapters do not include detectors--order separately. * Device is also compatable with 8833-R adapter. # Device is also compatible with 8836-R adapter if the Fireye insulated nylon coupling is used. ▲ For models configured with the NPT thread option
Bulletin 8832 Page 2
Made with FlippingBook flipbook maker