1147
Cautions for Selecting and Installing Slides
Centre of gravity
W 2
T 2
W 2
W
T 2
T
The load capacity is determined with the drawer's centre of gravity at the midpoint of the travel length and width in the lateral direction (refer to the figure above). Conditions are set for slide installations with a width of 300mm, approximately 10 times of withdrawal per month, static load, with the slide securely fixed to the cabinet and drawer and installed vertically. Calculation of Slide Centre of Gravity
*Load Capacity Change by Installation Method The load capacity changes significantly if the slide is not installed vertically. For example, the load capacity of a slide installed horizontally may be less than 25% of that listed in this catalogue.
100% 75% 50% 25%
Cautions for Slide Selection and Installation Slide performance varies depending on its usage conditions. The durability and load capacity of slides greatly depend on cabinet dimensions, centre of gravity position, frequency of use, slide installation method, cabinet installation location, etc. ● Slide Selection Reference Application Examples Note: The slide must be installed correctly.
Load: 588N (60kgf) Frequency: 1 time / 3 months
Load: 196N (20kgf) Frequency: 10 times / day Installation place: Office Recommended slide: Models with load capacity of 588N (60kgf)
Load: 588N (60kgf) Frequency: 1 time / day Installation place: Special places Recommended slide: Models with load
Installation place: Laboratory, computer room Recommended slide: Models with load capacity of 588N (60kgf)
capacity of 1176~1960N (120~200kgf)
● Note: Do not change the combination of inner and outer members.
[Temperature Range] 5°C~35°C
No.500 Catalogue
Made with FlippingBook - professional solution for displaying marketing and sales documents online