1183
Website for latest info
TWO-WAY CATCH FOR SLIDES JC-30TW NEW
Latest Info
• Holds a slide in position from both directions. • Retaining force can be adjusted by rotating the strike. • Designed to be used with a two-way travel slide, holding it in the center. • Can be used with slides between 19 and 21 mm in thickness.
SCREW
Applications • A two-way travel slide to hold in the center. • A one-way travel slide to hold in open or closed position. • A one-way travel slide to hold in the middle. Remarks • Should be used with slides. • It is recommended to use one per slide. • Retaining force may vary. Please check actual performance with an actual product. Parts Included • Truss head tapping tapping screw 4 × 16 Recommended Screw • M4 binding head screw, M4 truss head screw
Feature
Adjusting Retaining Force
Rotate the strike to change retaining force.
[The letter “L” is in the right direction]
[The letter “H” is in the right direction]
It works from both directions.
Application Example
Rotate
Strike
Mounting plate for strike
small diameter
large diameter
JC-30TW
Retaining force: low
Retaining force: high
Can be used as a center-catch of a two-way travel slide
Housing
Slide
Drawer
3
30 20 9
60
14.5
11.5
8.5
5.5 4.5
46
2.5
2 × ϕ 4.2
2 × ϕ 4.5
Strike and mouting plate for strike *Setting of retaining force: low
1 2
3
19-21
No.
Part Name
Material
Finish / Colour
Strike
Polyamide (PA)
Grey Grey Grey
Mounting plate for strike Polyamide (PA)
Strike plate
POM
Push-in Force N Push-in Force kgf
Pulling Force N Pulling Force kgf
Weight (g)
Box (pcs)
Carton (pcs)
Item Code
Item Name
Low High
Low High
Low High
Low High
JC-30TW
140-041-094
18.5
27.9
1.9
2.8
32.6
65.9
3.3
6.7
12.4
30
300
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online