28
32 16
34 16
10
Horizontal adjustment screw
1374
Description of Main Text
Installed to Door
Page
Viewable from the QR code.
59
Website for latest info
Access website, videos and selection tools
3-WAY ADJUSTABLE CONCEALED HINGE HES3D-E190
Latest Info
• Thin profile allows for shallow mortise. • 3D Adjustment Post Installation: Adjust vertically, horizontally, and in depth. • For simplified door hanging, the hinge divides into two parts: one for the door-side and one for the frame-side. • Can temporarily be hung before fixing with screws. • Has a fire safety rating of ANSI/UL 10C, CAN/ULC-S104 • Custom colours available on request. Please contact us for details.
Passed Private 300K Cycle Test
Category
3
INSTRUCTION SCREW
Remarks • Read all remarks on handling thoroughly before use. • Please use the Selection Tool for HES Concealed Hinges to select a hinge. Parts Included • Countersunk head screw 5×30 (4 pcs/hinge) • Allen key size 4 Sold Separately • Installation template HES3D-E190-TMP (P.60) • Metal door bracket E190BKT (P.60)
Product category
5
Feature
Installation
Selection Tool
Design support/Selection tools
1
A *
HES Hinge
Door
B *
+1 mm Depth adjustment -1 mm
Without covers.
4
180˚
(17.7)
34
X
150˚
Vertical adjustment screw
Frame
Frame
Depth adjustment screw
(17.7)
4 × ϕ 5.5 ϕ 10.3
+3 m Horizontal a
28
28
32 16
34 16
10
10
120˚
-2 mm Horizontal adjustment
Horizontal adjustment screw
Y 32
90˚
+3 mm
Door
60˚
Installed to Frame
Installed to Door
30˚
Depth adjustment
+1 mm
-1 mm
Vertical adjustment
-2 m
Please process the part (corner of door/frame) of * marked on the drawing to C1 or more (or R1 or more).
+3 mm
Y: Door machining margin
B: Door
X: Frame machining margin
A: Frame
chamfering
chamfering
-3 mm
3
1
6.5 and under
1 2 3 2 3 4
7 8
4 and under
2
6.5 and under
7 8
5
3
Finish/C
Cut Out Dimensions
5
No. Part Name Material
Y
32
28
28
34
1
2
X
DC DN Body Zinc Alloy (ZDC) Satin Chrome Satin Nicke Base Frame Zinc Alloy (ZDC) Satin Chrome Satin Nicke Arm Aluminum Alloy Satin Chrome Satin Nicke Shaft Stainless Steel Plain Plain Cover ABS Silver Champagne Go
10
10
+1 mm Depth adjustment -1 mm
With the selection tool Sasuga-kun, you can select the “Motion Design Tech” products meeting your requirements simply by entering values such as the size and weight of the lid or door. You can use it on our website.
4
+3 mm Horizontal adjustment
-2 mm
Finish/Colour
No. Part Name Material
DC NI Body Zinc Alloy (ZDC) Satin Chrome Satin Nickel Black Enamel Nickel Base Frame Zinc Alloy (ZDC) Satin Chrome Satin Nickel Black Enamel Nickel Arm Aluminum Alloy Satin Chrome Satin Nickel Black Enamel Nickel Shaft Stainless Steel Plain Plain Plain Plain Cover ABS Silver Champagne Gold Black Nickel DN BL
Z073d02.eps
8 × R6
8 × R6
Door
Frame
Door Specs
Opening Angle
Colour
Item Code Item Name
Item Code Item Name
Colour
Weight Box Carton
Width Height Thickness
Weight
Width
170-025-498 HES3D-E190DC
Silver
Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚
1,100 g 2 pcs 12 pcs 1,100 g 2 pcs 12 pcs 1,100 g 2 pcs 12 pcs 1,100 g 2 pcs 12 pcs
170-025-499 HES3D-E190DN Champagne Gold Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚
170-025-539 HES3D-E190BL 170-033-568 HES3D-E190NI
Black Nickel
Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚ Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚
170-025-498 HES3D-E190DC Max. 900 170-025-499 HES3D-E190DN Champagne Gold Max. 900 170-025-539 HES3D-E190BL Black Max. 900 170-033-568 HES3D-E190NI Nickel Max. 900 Silver
Installation Template This is sold in pairs, one for the door and one for the frame.
Z073d01.eps
Item Code 170-028-808
Item Name
Material
Colour
HES3D-E190-TMP
Methacrylic Resin (PMMA)
Clear
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
• Please specify the Item Name. and quantity when ordering. Installation Template This is sold in pairs, one for the door and
0059.indd 59
2024/07/26 10:23:43
Online Catalogue Functions
Item Code 170-028-808
Item Name
Material
HES3D-E190-TMP
Methacrylic Resin (
See Help for other functions and operation methods. ❹ Pen Draw arrows, add frames, or take notes on the catalogue as desired. ❻ Bookmarks Register favourite pages for easier reference later. ❺ Note Enter notes. Display only pages with sticky notes affixed.
❶ CAD etc. Access product information easily.
Z073d03.eps
58
59
Website for latest info
Website for latest info
Latest Info This information provides a range of quality for the component. It does not ensure
STAINLESS STEEL CONCEALED HINGE
With 3-way Adjustable Function HGS3D-S160SH
3-WAY ADJUSTABLE CONCEALED HINGE HES3D-E190
Latest Info
NEW
• Stainless steel structure with excellent corrosion resistance. • With three-way adjustment function (vertical, horizontal, depth). • The hinge can be split into two parts. (door and frame sides)
• Thin profile allows for shallow mortise. • 3D Adjustment Post Installation: Adjust vertically, horizontally, and in depth. • For simplified door hanging, the hinge divides into two parts: one for the door-side and one for the frame-side. • Can temporarily be hung before fixing with screws. • Has a fire safety rating of ANSI/UL 10C, CAN/ULC-S104 • Custom colours available on request. Please contact us for details.
Passed Private 300K Cycle Test
Passed Private 300K Cycle Test
INSTRUCTION SUS
Application • Residential doors, fire doors, facility doors, etc. Parts Included • Flat head tapping screw 5×40 (stainless steel)
INSTRUCTION SCREW
• Hex key 4, 3, 2.5 Optional Parts • Square screw cover: Order when cut out is square (steel fittings, etc.). Remarks • Be sure to read the “Cautions” (P.23). • Please use the Selection Tool for HES Concealed Hinges to select a hinge. • When using with a door damper and/or closer, select LDD-S (P.566), LDD-V(P.568), or LDC-N2 (P.572). Select a door weight within a range satisfying the conditions of both the hinge and the door damper and/or closer. Verify all conditions before installation. • When using a closer with a stopper, be sure to use a door stopper as well (floor mounting type, wall mounting type, etc.). Install the door stopper further forward than the closer stopper, between the centre and edge of the door. • If noise is generated during use, apply lubricant (grease) as needed.
Remarks • Read all remarks on handling thoroughly before use. • Please use the Selection Tool for HES Concealed Hinges to select a hinge. Parts Included • Countersunk head screw 5×30 (4 pcs/hinge) • Allen key size 4 Sold Separately • Installation template HES3D-E190-TMP (P.60) • Metal door bracket E190BKT (P.60)
❷
With square screw cover (optional)
Figure shows top screw cover removed.
(16.3)
31.5
4 × ϕ 5.4 ϕ 10
31.5
4 × ϕ 5.4 ϕ 10
15 29.5
15 29.5
7.5
Feature
Installation
Selection Tool
7.5
Vertical adjustment screws (2 locations)
Depth adjustment screws (2 locations) Horizontal adjustment screws (2 locations)
❷ Clip Download images within the dragged area.
A *
Door side
Frame side
HES Hinge
Door
B *
Vertical adjustment
Without covers.
+2 mm
Selection Tool
1
180˚
(17.7)
34
X
Locus Chart
Frame Reference Surface
-2 mm
2
150˚
Vertical adjustment screw
Door Reference Surface
Frame
Frame
Depth adjustment screw
30
(17.7)
4 × ϕ 5.5 ϕ 10.3
3
HES Hinge
28
28
32 16
34 16
X
Door
(16.3)
10
10
*A *B
180°
120˚
Horizontal adjustment
Frame Reference Surface
4 5
Y 32 0059.indd 59 90˚
Horizontal adjustment screw
-2 mm
-1.5 mm +1.5 mm Depth adjustment
150°
Frame
Frame
120°
Horizontal adjustment
Horizontal adjustment
+3 mm
Door
+1.5 mm
-1.5 mm
60˚
90°
Door Reference Surface
Installed to Frame
Installed to Door
30˚
60°
Door
Depth adjustment
30°
-1.5 mm
30 Y
+1.5 mm
+1 mm
-1 mm
Vertical adjustment
Please process the part (corner of door/frame) of * marked on the drawing to C1 or more (or R1 or more).
Depth adjustment
+3 mm
+1.5 mm
-1.5 mm
*The door and frame must be chamfered in accordance with the machining margin, in order to open and close the door.
Y: Door machining margin
B: Door
X: Frame machining margin
A: Frame
chamfering
chamfering
-3 mm
Clip
❶
3
Y: Door machining margin B: Door chamfering X: Frame machining margin A: Frame chamfering
1
6.5 and under
1 2 3 2 3 4
1
5 or below
1 2
7 8
4 and under
4 or below
6 7
2
2
6.5 and under
3
5 or below 6
7 8
5
3
4 × R0.3 Square Screw Cover (Optional Parts)
5
3
4
(Reference values)
29.3
1.5
Cut Out Dimensions
5
A
Cut Out Dimensions
Y
32
28
28
34
1
2
X
30
10
10
30
32
+1 mm Depth adjustment -1 mm
4
15
15
8
X
Y
+3 mm Horizontal adjustment
❸ MyBinder Register favourites to MyBinder to download multiple catalogues together as a single PDF.
0.2 Cutaway view A-A A
❺
-2 mm
Door 4 × R15
Frame 4 × R15
Door Reference Surface Frame Reference Surface
*When using the optional square screw cover, drill the first oval hole in both the door and the frame as a square hole of width 30 × length 160 × depth 8.
Finish/Colour
No. Part Name Material
DC NI Body Zinc Alloy (ZDC) Satin Chrome Satin Nickel Black Enamel Nickel Base Frame Zinc Alloy (ZDC) Satin Chrome Satin Nickel Black Enamel Nickel Arm Aluminum Alloy Satin Chrome Satin Nickel Black Enamel Nickel Shaft Stainless Steel Plain Plain Plain Plain Cover ABS Silver Champagne Gold Black Nickel DN BL
Z073d02.eps
No.
Part Name
Material
Finish
8 × R6
8 × R6
Door
Frame
① ② ③ ④
Body
Base frame
Stainless Steel (SUS304)
Plain
Arm
Door Specs
Rotating Shaft ⑤ Screw Cover (round type)
Opening Angle
Item Code Item Name
Colour
Weight Box Carton
Satin
Width Height Thickness
Weight
Body
170-025-498 HES3D-E190DC
Silver
Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚
1,100 g 2 pcs 12 pcs 1,100 g 2 pcs 12 pcs 1,100 g 2 pcs 12 pcs 1,100 g 2 pcs 12 pcs
Door Specs
Load Capacity
Opening Angle
Item Code
Item Name
Finish
170-025-499 HES3D-E190DN Champagne Gold Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚
Width
Height
Thickness N/2 pcs kgf/2 pcs N/3 pcs kgf/3 pcs
170-025-539 HES3D-E190BL 170-033-568 HES3D-E190NI
Black Nickel
Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚ Max. 900 Max. 2400 Min. 38 mm Max. 100 kg/2 pcs Max. 125 kg/3 pcs 180˚
HGS3D-S160SH
170-050-961
Satin Max. 900 Max. 2400
Min. 36
784
80
981
100
180°
Square Screw Cover (Optional Parts)
Sold as a set (4 pcs).
Installation Template This is sold in pairs, one for the door and one for the frame.
Item Code 170-050-962
Item Name
Material
Finish
Z073d01.eps
Item Code 170-028-808
Item Name
Material
Colour
HGS3D-S160SH-SQPLATE
Stainless Steel (SUS304)
Satin
HES3D-E190-TMP
Methacrylic Resin (PMMA)
Clear
Please contact your local agent or nearest Sugatsune subsidiary for detail and availability.
❹
❻
❸
No.500 Catalogue
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
0058.indd 58
2024/07/26 10:21:47
0059.indd 59
2024/07/26 10:23:43
*Screens may be changed.
Z073d03.eps
How to Use This Catalogue • All items, unless specified, are made to exact metric dimension. • Changes in dimensions, finishes, packing, etc., and suspension of production may occur without notice. • Our liability is limited to the replacement of the merchandise.
No.500 Catalogue
Made with FlippingBook - professional solution for displaying marketing and sales documents online