165
Website for latest info
GLASS DOOR HINGE
For Inset Doors GS-GH50
Latest Info
NEW
• Designed for large inset glass showcases. • Recommended for use with the GS-GL50 lock (P.1220) for design coordination. • Doors can be temporary held in frames before fixing screws for easy installation. • The door position can be adjusted by ± 3 mm right and left post installation. (Horizontal adjustment screw) • The gap below the door can be adjusted from 7 up to 12 mm post installation. (Height adjustment ring)
INSTRUCTION TEMPERED GLASS SCREW
Selection Tool
Remarks • Be sure to read the “Precautions for Use” (P.23).
• Prioritize the door weight when determining the glass size. • For 8 mm thick glass, use with a packing A, B, and spacer.
Glass Hinge
Door Position Adjustments
• For 10 mm thick glass, use with a packing A and B. • For 12/12.7 mm thick glass, use with two packing A. • Shatter proof films are recommended to be used on glass doors for safety. Parts Included • Cross-recessed countersunk tapping screw 5×30 • Hex key 3 (for door position adjustments) • Hex key 5 (for hinge assembly) • Packing A • Spacer (for 8 mm thick glass)
Door height can be adjusted by turning the ring with a hex key. It can also be done post installation. Lateral adjustment can be done with the screw.
Screw
Min. 6
35
Min. 6
35
22 22 22 85
Cut Out Dimensions
3 × ϕ 5.5 ϕ 10.4
22 22 22 85
3 × ϕ 5.5 ϕ 10.4
8
8
95
36
3
3
120
7.5
10
120
7.5
10
12 or 12.7
7.5
12 or 12.7
7.5
8
7.5
7.5
8
± 3mm
± 3mm
Packing A (included)
Packing A (included)
Spacer (included)
Spacer (included)
6
7 6
7 6
6
7 6
7 6
120
9 8
94
120
9 8
4 1
2
4 1
2
Release latch
Release latch
5
5
Height adjustment ring
Adjustment screw
3 × ϕ 5.5 ϕ 11
Height adjustment ring
Adjustment screw
3 × ϕ 5.5 ϕ 11 ϕ 19.5
14
14
ϕ 19.5
28
22 22 22
28
8
22 22 22
8
85
12 / 12.7 mm thick
8 mm thick
10 mm thick
85
Min. 6
12 / 12.7 mm thick
8 mm thick
10 mm thick
Min. 6
35
35
Mounting Position on Top Board Processing on Bottom Panel
Finish CR GPBL
No.
Part Name
Material
Min. 41
Min. 41
Side panel
22 22 22
① ② ③
Body (front) Body (back)
Side panel
22 22 22
3 × tapping screw 5 × 30 (prepared hole)
(Depth: Min. 20)
ϕ 20 +1 0
3 × tapping screw 5 × 30 (prepared hole)
(Depth: Min. 20)
ϕ 20 +1 0
Gold Plated (24K)
3 × tapping screw 5 × 30 (prepared hole) 3 × tapping screw 5 × 30 (prepared hole)
Enamel Black
Zinc Alloy (ZDC)
Upper Shaft Unit ④ Bottom Shaft Unit ⑤ Bottom Mounting Plate ⑥
Chrome
22 22 22
Side panel
22 22 22
Side panel
Min. 41
Min. 41
Packing A
Spacer (for 8 mm thick glass)
Packing A (t: 1.5) Chloroprene Rubber (CR) Packing B (t: 3.5)
Black
1.5
2
1.5
⑦ ⑧
1.5
2
1.5
8
Hex socket bolt M8×16 Hex socket bolt M5×10
8
Gold Plated (24K)
Enamel Black
Steel
Chrome
⑨
❷上を差し込む
Easy Installation
Set the hinges to the shaft units on top and bottom panels.
The door can be temporarily held in the frame.
Fix the screws. Door position can be adjusted post installation.
Bottom unit first
❶ガラス扉を 下から軸にのせる
Sold in sets of two hinges.
❺ねじを締込む
Available Glass Size
Load Capacity/set
Box (set)
Carton (set)
Item Code
Item Name
Finish/Colour
Width Height
Thickness
N
kgf
GS-GH50-CR GS-GH50-GP GS-GH50-BL
170-046-839 170-046-840 170-046-841
Chrome
1 1 1
4 4 4
Gold Plated (24K)
Max. 900 Max. 2500 8, 10, 12, 12.7
490
50
Enamel Black
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online