254
Website for latest info
LIFT-ASSIST DAMPER LAD
Latest Info
Opening Direction Features Door Material Item Name Maximum Door Moment
Lift-assist Soft-close Passed Private 100K Cycle Test
8.0~10.5 N·m/pc (81.6~107.1 kgf · cm/pc) 10.5~13.5 N·m/pc (107.1~137.7 kgf · cm/pc) 13.5~16.0 N·m/pc (137.7~163.2 kgf · cm/pc)
LAD-L
Lift-assist
Wood
LAD-M
Soft-close
LAD-H
• Ideal for counter flaps at bars, restaurants, and receptions. • Smooth and soft close movement at the end, preventing flaps from slamming shut. Damper works even at a slight opening angle. • Lift-assist mechanism with light opening. • Can be installed to existing counters without additional processing. • Installation position can be easily determined with the supplied template. • Slim arm unit does not disturb the doorway. Projection is only 35 mm when opened. • 2 pairs use possible. Torque becomes double. 3 pairs or more not allowed.
Damper unit
Arm unit
Application Example
INSTRUCTION
SCREW
Specifications • Operating temperature: 0°C~40°C Remarks
• Use with single knuckle hinges or concealed hinges (sold separately) . • Do not use with slide hinges. Otherwise, hinges may deform and flap may not close. • No functions to hold flap in opened position and stop in opening direction. Install a safety device separately. • Please prepare separate holder to support the flap in closed position. (see below*). • Do not forcibly open and close flap more than necessary. • Since load is applied to flap, side panel and hinge, ensure that the frame structure has sufficient strength. • Be careful not to pinch fingers between arm unit and damper unit. Parts Included • Binding head tapping screw 4×16 Selection Tool Feature
• Soft-Close
Damper works just before flap closes, preventing it from slamming shut and pinching fingers.
• Template for positioning Recommended Hinge • Concealed hinge R (P.196)
Damper Stay
*separate holder to support the flap required.
Soft-close even at slight angle
• Lift-assist
Top panel can be lifted lightly.
Lifting lightly
For Door Thickness More Than 25 mm When door thickness exceeds 25 mm, you may be able to use this product by using with spacer (sold separately) (P.255) or rounding the flap (figure below).
Rounded top panel
Spacer LAD-DP Recommended thickness: 25~40 mm (See (P.255))
• Easy post-installation
Can be post-installed to existing counters without processing. Simply by pressing against the supplied mounting template, installation position can be easily determined.
For Installing on Horizontal Surface When installing on a horizontal surface, please use bracket for back mount (sold separately) (P.255).
Bracket for back mount LAD-BKT (See (P.255))
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online