48
Website for latest info
SURFACE-MOUNT CONCEALED HINGE
110° Opening HES2S-150-A110
Latest Info
NEW
• Surface mounts on the jamb side for easy installation. • Supports door thickness of 35 mm or more.
Under Development
Passed Private 300K Cycle Test
• For doors with a thickness of 35 or 36 mm, centre mounting is possible, making the door non-handed (usable as both right-handed and left-handed). • 3D Adjustment Post Installation: Adjust vertically, horizontally, and depth.
INSTRUCTION SCREW
Parts included • Countersunk head tapping screw 4×20 (4 pcs/hinge) Stainless • Cross-recessed truss tapping screw 4×16 (4 pcs/hinge) Steel • Hex key 3 • Door side drilling/frame side mounting template Remarks • Use with a door stopper to prevent opening farther than 110°. • The hinge cannot be divided between the door and frame. • Use the selection tool to check the compatibility for your projects.
Photo shows product under development. 110° Opening (with cover)
Usage Image
Selection Tool
6
Frame side
Door side
1
3
7
HES Hinge
Vertical direction +3mm
-3mm
4.2
Depth direction
A
No mortising on the jamb side is required.
+2mm
-2mm
B
Frame reference plane
+2mm Horizontal direction
Locus Chart
Drill at the door corner (B). The frame corner (A) can be used even without machining.
Frame
-2mm
-2mm Horizontal direction
Check the leading edge opening clearance in the table (P.64).
90° Opening (without cover)
Y
Vertical Adjustment Screw/ Mounting Screw (2 pcs)
Door side fixing screw hole (2 pcs)
Y: Door Machining Margin
B: Door
A: Frame
27
Door
19
15
6
chamfering
chamfering
Door reference plane
+2mm
2.5 9
Horizontal adjustment screw (2 pcs)
Depth Adjustment Screw/ Mounting Screw (2 pcs)
4.5 or below
1 or higher
-
Min. 35
Depth direction
Frame side fixing screw hole (2 pcs)
+2mm
-2mm
5 ４
Cut Out Dimensions
Drill pilot holes at the positions of the adjustment and locating screws.
*D: Depth adjustment
27 +1 0
2
Fixing screw position* 1 (When vertically adjusted to centre)
screw pilot hole position Frame reference plane Depth adjustment screw pilot hole Fixing screw position* 1 (When depth adjusted to centre)
4.5 or below Door front surface (door reference plane) Vertical adjustment screw pilot hole
（2.5）
2×φ4.5 (8.7 countersunk) 2×4.5×8.5 oval 8.7×12.7 countersunk
2×φ4.5 2×4.5×10.7 oval
Frame
23 ±0.5
6
Door
40 +1 0
Detailed Figure Scale 2:1
8×R6 (Max.)
Depth adjustment screw pilot hole Fixing screw position* 1 (When depth adjusted to centre)
Vertical adjustment screw pilot hole
Fixing screw position* 1 (When vertically adjusted to centre)
Door
Frame
Door
* 1 Vertical/depth adjustment is not possible when the fixing screws have been mounted. Be sure to adjust in the vertical/depth directions before drilling the fixing screw pilot holes and mounting the fixing screws.
35 mm door (machining margin 4 mm) *C: Surface level difference *D: Adjustment screw pilot hole position 0 19 1 20 2 21 3 22 4 23 5 24
36 mm door (machining margin 4.5 mm) *C: Surface level difference *D: Adjustment screw pilot hole position 0 19.5 1 20.5 2 21.5 3 22.5 4 23.5 5 24.5
No.
Part Name
Material
Finish / Colour
① ② ③ ④ ⑤ ⑥ ⑦
Body
POM
-
Base Plate
SPCC
Chrome
Arm
Chemical Treatment
Zinc Alloy (ZDC)
Inner Socket
Chrome
Outer Socket Socket Cover
SPCC
ABS
-
Base Plate Cover
Diagram shows product under development.
Item Code
Item Name
Colour Door Width Door Height Door Thickness Door Weight kgf/2 pcs Door Weight kgf/3 pcs Opening Angle
170-056-969 HES2S-150-A110-WT 170-056-970 HES2S-150-A110-BL
White
Black 170-056-971 HES2S-150-A110-WGR Warm Grey
Max. 900 Max. 2700
Min. 35
40
50
110°
*This is a product under development, so the specifications may change.
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online