565
Website for latest info
For lapped (outset) doors
For inset doors
Install a door stopper in addition to this product.
Gap at leading edge (1)
Coverage (1)
Door
Door
Cross-recessed binding head tapping screw M3.5 × 30
25
55
Cross-recessed binding head tapping screw M3.5 × 30
25
55
A
38
A
38
Cross-recessed binding head tapping screw M3.5 × 15
Cross-recessed binding head tapping screw M3.5 × 15
Frame
Frame
A
B
C
Outset Doors 114 + Coverage (1) 24 + Coverage (2) Inset Doors 114 - gap at leading edge (1) 24 - gap (2)
23+Door Thickness
Suggested Options
ONE-TOUCH SLIDING HINGE FOR HEAVY DOORS J95
• A sliding hinge for heavy doors that can be used together with the DC-200 damper catch. • Use the type with a catch if using together with the DC-200 damper catch. • Supports large doors weighing up to 25 kg with 2 hinges or up to 40 kg with 3 hinges. • Enables one-touch installation and removal of the door. • Enables three-dimensional adjustment of the door. (+1.5 mm/-2.5 mm forward/back, ±3 mm up/down, +0 mm/-4 mm coverage adjustment [left/right]) • Streamlined design free of protrusions such as adjustment screws on the body top. • To ensure safety, the lock lever does not protrude from the back of the body.
Conventional product
Two pieces will do the job of five conventional hinges!
Suggested Options
LAPCON DOOR DAMPER LDD-S,LDD-V
Embedded
Surface Mount
LDD-V
LDD-S
• A damper for doors (fixtures). • Enables the door to be opened with less force than with door closers.
• Supports doors weighing up to 40 kg. • Contact us if your door is wider than 900 mm.
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online