571
Website for latest info
Cut Out Dimensions for Door
Dimension from frame to bore position of counter plate (mm)
LDD-V100-R (right-handed) shown. LDD-V100-L (left-handed) is symmetrical.
Door Hinge Clearance Between Hinge Side Frame and Door (mm) 1 2 3 4 5 HES3D-160, E190 217 218 219 220 221
Pivot Hinge
Axis position
Axis position
Clearance between hinge side frame and door
80
250
B
4 × Mounting hole
A=20 - 35 220 221 222 223 224 A=35 - 50 223 224 225 226 227 A=20 - 35 220 + B 221 + B 222 + B 223 + B 224 + B A=35 - 50 223 + B 224 + B 225 + B 226 + B 227 + B Centre position of counter plate
Butt Hinge
80 + B
Pivot Hinge
Axis position
1-step bore (upper clearance: 5 - 9 mm)
16
102
97
Clearance between hinge side fram
Cut out part
80
250
282
*If clearance between hinge side frame and door is beyond the range in the table above, calculate as per the table below. Dimension from Frame to Bore Position of Counter Plate (mm) HES3D-160, E190 216 + Clearance Between Hinge Side Frame and Door Door Hinge Upper frame side
of ckness
4 × Mounting hole
2 x R12.5 2 × Mounting hole
A=20 - 35 219 + Clearance Between Hinge Side Frame and Door A=35 - 50 222 + Clearance Between Hinge Side Frame and Door A=20 - 35 219 + B + Clearance Between Hinge Side Frame and Door A=35 - 50 222 + B + Clearance Between Hinge Side Frame and Door Centre of door thickness 16
19.5
Butt Hinge
102
97
282
Pivot Hinge
* Refer to for 3-way adjustable concealed hinge HES3D.
Dimension from frame to bore position of counter plate
27
19.5
Cut Out Dimensions for Frame
LDD-V100-R (right-handed) shown. LDD-V100-L (left-handed) is symmetrical.
Centre position of counter plate
Centre position of counter plate
Axis position
1-step bore (upper clearance: 5 - 9 mm)
2-step bore (upper clearance: 3 - 5 mm)
Clearance between hinge side frame and door
80
250
4 × Mounting hole
of ckness
Upper frame side
Upper frame side
2 x R12.5 2 × Mounting hole
19.5
2 x R12.5
101
97 4 x R6
19.5
16
102
Cut out part
282
Centre of door thickness
Centre of door thickness
Dimension from frame to bore position of counter plate
27
19.5
2 × Mounting hole
Dimension from frame to bore position of counter plate 27
19.5
Centre position of counter plate
2-step bore (upper clearance: 3 - 5 mm)
Safety Cautions
• Do not drop or give strong impact to this product. • This product can not resist strong wind. Do not use it under strong wind, or the damper effect will decrease. • If you close the door with excessive force, the damper effect may decrease. Upper frame side
• The door may not close enough depending on the case lock used. • This product is designed for interior use. Do not use it outdoors. • Do not use it at places subject to moisture and water. • At the entrance of highly airtight room, the door closing speed and damper force may change, and the door may not close enough. • The closing speed varies depending on the use environment (temperature, wind and hinges used on the door, etc.). Operating temperature: 0˚C - 40˚C • Do not apply a load in the vertical direction or excessive force to pull-in arm. Otherwise, it may be damaged. • Please install and adjust this product after adjusting the door hinges. Centre of door thickness 19.5 2 x R12.5 101 4 x R6 2 × Mounting hole Dimension from frame to bore position of counter plate 27 19.5
• Please use the door hinges within the adaptive door weight range of this product. • Please install this product horizontally. Otherwise, it may not operate properly. • After vertical adjustment of counter plate, tighten the fixing nut firmly. • This product is supplied with installation instruction. Be sure to read before installation or use. • Regularly check for looseness or dropout of screws during use.
WL-N1800d04.ep
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online