58
Website for latest info
STAINLESS STEEL CONCEALED HINGE
With 3-way Adjustable Function HGS3D-S160SH
Latest Info
NEW
• Stainless steel structure with excellent corrosion resistance. • 3D Adjustment Post Installation: Adjust vertically, horizontally, and depth. • For simplified door hanging, the hinge divides into two parts: one for the door-side and one for the jamb-side.
Passed Private 300K Cycle Test
INSTRUCTION SUS
Application • Residential doors, fire doors, facility doors, etc. Parts Included • Flat head tapping screw 5×40 (stainless steel)
• Hex key 4, 3, 2.5 Optional Parts • Square screw cover: Order when cut out is square (steel fittings, etc.). Remarks • Be sure to read the “Precautions for Use” (P.23). • Please use the Selection Tool for HES Concealed Hinges to select a hinge. • When using with a door damper and/or closer, select LDD-S (P.566), LDD-V(P.568), or LDC-N2 (P.572). Select a door weight within a range satisfying the conditions of both the hinge and the door damper and/or closer. Verify all conditions before installation. • When using a closer with a stopper, be sure to use a door stopper as well (floor mounting type, wall mounting type, etc.). Install the door stopper further forward than the closer stopper, between the centre and edge of the door. • If noise is generated during use, apply lubricant (grease) as needed.
With square screw cover (optional)
Figure shows top screw cover removed.
(16.3)
31.5
4 × ϕ 5.4 ϕ 10
31.5
4 × ϕ 5.4 ϕ 10
15 29.5
15 29.5
7.5
7.5
Vertical adjustment screws (2 locations)
Depth adjustment screws (2 locations) Horizontal adjustment screws (2 locations)
Door side
Frame side
Vertical adjustment
+2 mm
1
Locus Chart
Selection Tool
Frame Reference Surface
-2 mm
2
Door Reference Surface
30
3
X
Door
(16.3)
*A *B
180°
Frame Reference Surface
4 5
HES Hinge
-1.5 mm +1.5 mm Depth adjustment
150°
Frame
Frame
120°
Horizontal adjustment
Horizontal adjustment
+1.5 mm
-1.5 mm
90°
Door Reference Surface
60°
Door
30°
-1.5 mm
30 Y
+1.5 mm
Depth adjustment
+1.5 mm
-1.5 mm
*The door and frame must be chamfered in accordance with the machining margin, in order to open and close the door.
Y: Door machining margin B: Door chamfering X: Frame machining margin A: Frame chamfering
1
5 or below
1 2
4 or below
6 7
2
3
5 or below 6
5
3
4 × R0.3 Square Screw Cover (Optional Parts)
4
(Reference values)
29.3
1.5
A
Cut Out Dimensions
30
30
8 32
15
15
X
Y
0.2 Cutaway view A-A A
Door 4 × R15
Frame 4 × R15
Door Reference Surface Frame Reference Surface
*When using the optional square screw cover, drill the first oval hole in both the door and the frame as a square hole of width 30 × length 160 × depth 8.
No.
Part Name
Material
Finish
① ② ③ ④
Body
Base frame
Stainless Steel (SUS304)
Plain
Arm
Rotating Shaft ⑤ Screw Cover (round type)
Satin
Body
Door Specs
Load Capacity
Opening Angle
Item Code
Item Name
Finish
Width
Height
Thickness N/2 pcs kgf/2 pcs N/3 pcs kgf/3 pcs
HGS3D-S160SH
170-050-961
Satin Max. 900 Max. 2400
Min. 36
784
80
981
100
180°
Square Screw Cover (Optional Parts)
Sold as a set (4 pcs).
Item Code 170-050-962
Item Name
Material
Finish
HGS3D-S160SH-SQPLATE
Stainless Steel (SUS304)
Satin
Please contact your local agent or nearest Sugatsune subsidiary for detail and availability.
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online