631
Website for latest info
Installation Example
For no door left open (DN = 0), fabricate such that the door pocket from plate comes off to hang the door.
Upper Roller Cover Cap (optional)
Door Overlap Allowance 10 (when there is no door left open (DN = 0): Door Overlap Allowance 20)
When door is fully open
Cut Out Dimensions
Rail Interlock Position
Door Leading Edge Trigger Position
Leading edge Trailing edge When the upper roller cover cap (P.636) (optional) is used
Min. 2×C5
45 16
3030
Trailing Edge Side Trigger Position
147
297
When door is fully closed
16
In-frame Opening Width RW
Upper Roller Cover Cap
Surface Mount
Recessed Mount
Open Side Rail Length Lo = RoW
Door Pocket Side Rail Length Lp = RW − RoW
45
Leave Door Open DN
Effective Opening Width RoW
Width 21 * 4
When the embedded lower guide track (P.636) (optional) is used
Door Pocket Width RpW = RW − RoW − DN
124.5 45
20
φ 4.6, φ 7.8 countersunk
30
303030
5
2 × φ 4.5
30
30
15
12
Rail Interlock Position
3
1
4 2
16
Recessed Lower Guide Track
Door Width DW = RoW + DN + 10 (when there is no door left open (DN = 0): RoW + 20)
φ 4.6, φ 7.8 countersunk
30
15
Door Pocket Opening End Face
Min. 7
Min. 7
⬅ ➡ ➡ ±2 * 3 ⬅
Door Leading Position When Fully Open
Door Rear Position When Fully Closed
*2 The gap between the upper track and the door can be adjusted within a range of -3 mm to +4 mm. *3 The horizontal position of the door can be adjusted within a range of -2 mm to +2 mm. *4 If wrapping with a cloth, etc., account for the dimensions of the cloth.
12
14
10 17
28
6
51
Upper Track Processing
• Length: 860/1260mm (2pcs used)
Door leading edge side
Connection side
Length Lo
30
124.5
45
Cut
20
30
Con- necting edge
Types of Upper Tracks Included screws: Cross-recessed flathead tapping screws 3.5 × 25
Countersink Hole Processed 3 Places
30
φ 4.6, φ 7.8 countersunk
2 × φ 4.5
Outside pocket
Silver White Item Code Item Name Item Code Item Name Item Code Item Name Amber
Type Length
Connection side
Door trailing edge side
Length Lp
30
(1) Upper
Cut
20
Con- necting edge
30
250-035-283 FD30-35EV-TRMP860-SL
250-035-288 FD30-35EV-TRMP860-UM
250-035-293 FD30-35EV-TRMP860-WT
Track 860 mm
φ 4.6, φ 7.8 countersunk
Countersink Hole Processed 3 Places
30
Surface Mount
250-035-284 FD30-35EV-TRMP1260-SL
250-035-289 FD30-35EV-TRMP1260-UM
250-035-294 FD30-35EV-TRMP1260-WT
Inside pocket
1260 mm
• Length: 1860/2760/3960mm (1pc used)
Connection side Door leading edge side
Door trailing edge side
Connection side
250-035-285 FD30-35EV-TRMP1860-SL
250-035-290 FD30-35EV-TRMP1860-UM
250-035-295 FD30-35EV-TRMP1860-WT
Length Lp
Length Lo
1860 mm
30
30
Cut
Cut
Con- nect- ing edge
124.5
20
20
30
30
45
Con- necting edge
20
250-035-286 FD30-35EV-TRMP2760-SL
250-035-291 FD30-35EV-TRMP2760-UM
250-035-296 FD30-35EV-TRMP2760-WT
30
30
2760 mm
φ 4.6, φ 7.8 countersunk
Countersink Hole Processed 3 Places
φ 4.6, φ 7.8 countersunk
Countersink Hole Processed 3 Places
2 × φ 4.5
Inside pocket
Outside pocket
250-035-287 FD30-35EV-TRMP3960-SL
250-035-292 FD30-35EV-TRMP3960-UM
250-035-297 FD30-35EV-TRMP3960-WT
3960 mm
9.4
Door Adjustment
With bounce prevention function Prevents the door from bouncing up while the soft-close function is operating.
(1) Upper
250-043-802 FD30-35EV-TRHP860-SL
250-043-807 FD30-35EV-TRHP860-UM
250-043-812 FD30-35EV-TRHP860-WT
Horizontal Adjustment Screw
Track 860 mm
*
Scale Markings
Recessed Mount
250-043-803 FD30-35EV-TRHP1260-SL
250-043-808 FD30-35EV-TRHP1260-UM
250-043-813 FD30-35EV-TRHP1260-WT
1260 mm
±3
250-043-804 FD30-35EV-TRHP1860-SL
250-043-809 FD30-35EV-TRHP1860-UM
250-043-814 FD30-35EV-TRHP1860-WT
1860 mm
Loosen
±2
Vertical Adjustment Screw
Tighten
・ Adjustment is possible with one No.2 screwdriver. ・ Scale markings are provided for horizontal adjustment from the end of the door. * Bounce prevention nut
20
250-043-805 FD30-35EV-TRHP2760-SL
250-043-810 FD30-35EV-TRHP2760-UM
250-043-815 FD30-35EV-TRHP2760-WT
2760 mm
After adjusting, tighten the bounce prevention nuts (required parts (2) and (3)) using the spanner (included with closer) with a nominal size of 12 until the nuts come into contact with the upper track.
250-043-806 FD30-35EV-TRHP3960-SL
250-043-811 FD30-35EV-TRHP3960-UM
250-043-816 FD30-35EV-TRHP3960-WT
9.4 24
3960 mm
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Z101d02.eps
Made with FlippingBook - professional solution for displaying marketing and sales documents online