64
Required Opening Clearance for HES Hinges
Opening clearance is the gap between the frame and door required for door operation. The HES hinges require it on the door's leading edge, and the required space varies depending on the door thickness (DT). *The value does not consider changes over time. Please use this guide or referential purposes About Opening Clearance
HES3D
● HES3D-W190 (P.62)
● HES3D-V135LGR (P.56)
Opening Clearance
Opening Clearance
Opening Clearance
Door Thickness
Machining Margin
Door Thickness
Machining Margin
Frame
DT 600
DT 700
DT 800
DT 850
DT 915
DT 600
DT 700
DT 800
DT 850
DT 900
42 50 60 70 80
3 4 4 4 4
1.4 1.2 1.0 1.0 0.9 1.9 1.6 1.4 1.3 1.2 2.7 2.3 2.1 1.9 1.8 3.8 3.2 2.8 2.6 2.5 5.0 4.3 3.7 3.5 3.3
30 33 36 40 50
4 4 4 4 4
0.3 0.3 0.2 0.2 0.2 0.4 0.4 0.3 0.3 0.3 0.6 0.5 0.4 0.4 0.4 0.7 0.6 0.6 0.5 0.5 1.3 1.1 1 0.9 0.9
Door
Machining margin
● HES3D-E190 (P.59)
Opening Clearance
Door Thickness
Machining Margin
DT 600
DT 700
DT 800
DT 850
DT 900
38 50 60 70 80
3 4 4 4 4
1.0 0.9 0.7 0.7 0.7 1.8 1.5 1.3 1.2 1.2 2.6 2.2 2.0 1.8 1.7 3.6 3.1 2.7 2.5 2.4 4.8 4.1 3.6 3.4 3.2
● HES3D-120 (P.52)
● HES3D-120-A100 (P.53) ● HES3D-H120-36 (P.55)
Opening Clearance
Door Thickness
Machining Margin
● HES3D-E160 (P.57)
DT 600
DT 700
DT 800
DT 850
DT 900
Opening Clearance
Door Thickness
Machining Margin
29 33 36 40 50
3 4 4 4 4
0.6 0.5 0.4 0.4 0.4 0.7 0.6 0.5 0.5 0.5 0.9 0.7 0.6 0.6 0.6 1.1 0.9 0.8 0.8 0.7 1.8 1.5 1.3 1.3 1.2
DT 600
DT 700
DT 800
DT 850
DT 900
36 40 50
3 4 4
0.9 0.8 0.7 0.6 0.6 1.0 0.9 0.8 0.7 0.7 1.7 1.5 1.3 1.2 1.2
HES2S
● HES2S-140-A125 (P.47)
● HES2S-150-A110 (P.48)
Opening Clearance
Opening Clearance
Door Thickness
Machining Margin
Door Thickness
Machining Margin
Opening Clearance
DT 600
DT 700
DT 800
DT 850
DT 900
DT 600
DT 700
DT 800
DT 850
DT 900
38 40 50
4 5 5
35 36 40
4
0.8 0.6 0.6 0.5 0.5 0.8 0.7 0.6 0.6 0.5 1.4 1.2 1.1 1.0 0.9
0.6 0.5 0.4 0.4 0.4 0.6 0.5 0.5 0.4 0.4 0.8 0.7 0.6 0.5 0.5
4.5 4.5
Door
Machining margin
HES1F
● HES1F-140 (P.42)
Baseboard
Opening Clearance
Door Thickness
Machining Margin
Opening Clearance
DT 600
DT 700
DT 800
DT 850
DT 900
(reference)
36 40 45 50
4 6
1.5 1.3 1.1 1.0 1.0 1.6 1.4 1.2 1.1 1.1 1.8 1.5 1.3 1.3 1.2 2.0 1.7 1.5 1.4 1.3
Max. 9 Max. 9 Max. 7
Plasterboard Cloth Baseboard
Door
8.5
11
Max. 4.5
Machining margin
Door
* The values are calculated with the assumption that the mortise is positioned at the centre of the door, considering that the machining margin for the door should be 13 or less. * When using the hinge on thick doors, the baseboard thickness may be limited.
Limited by door thickness
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online