647
Website for latest info
Installation Example
*2 If the surface is lined, account for the thickness of the material. *3 The gap between the upper track and the door can be adjusted within a range of -3 mm to +3 mm. *4 The horizontal position of the door can be adjusted within a range of -2mm to +2 mm from the end of the door. *5 If the upper roller on the trailing edge side is replaced with a single soft closer (P.660) and a retrofit trigger (P.660), the door opening direction can be set to the soft-close specification (minimum door width 910mm).
Upper Roller Cover Cap (Optional)
Recommended Screw: Tapping Screw 3.5 x 20 (not included) Hole pitch 300 Recommended Screw: Tapping Screw 3.5 x 20 (not included)
Recessed Mount
Surface Mount
Recessed Width 21 *2 (Reference machining dimensions) Recessed Width 21 *2 (Reference machining dimensions)
30
Door thickness +8 Door thickness +8
Door thickness +8 Door thickness +8
20 20
30
Hole pitch 300
ϕ 4.8, ϕ 7.8 countersunk
448.5[450.5]
184.5
30.5[32.5]
30.5[32.5]
ϕ 4.8, ϕ 7.8 countersunk
448.5[450.5]
184.5
30.5[32.5]
30.5[32.5]
2 2
1 1
Trigger
4 4
8
8
Trigger
3 3
30[32]
*5
8
8
45[47]
30[32]
*5
45[47]
± 2
*4
± 2
*4
Embedded lower (P.664) guide rail (optional) Embedded lower (P.664) guide rail (optional)
24 min.
24 min.
24 min.
5 5
ϕ 11.5 ϕ 11.5
24 min.
12 12
15 15
12 12
24 min.
24 min.
Leading Edge Side
Trailing Edge Side
41 51 41 51
14
14
14
Leading Edge Side
Trailing Edge Side
28
28
28
14
14
14
[ ] indicates the dimensions when the upper roller cover cap (optional) is attached. (P.664)
28 Embedded lower guide rail (optional)
28
28
Types of Upper Track Recommended screws: Cross-recessed flat head tapping screws 3.5 x 20
Silver Item Code Item Name
Amber Item Code Item Name
White Item Code Item Name
Upper Tracks Length
Cut Out Dimensions
When using the upper roller cover cap (optional) (P.664)
16
Surface Mount
1820mm 250-017-805
250-017-806 FD30-TRM1820SCUM
250-025-146 FD30-TRM1820SCWT
FD30-TRM1820SCSIL
45
47
2
2000mm 250-018-873
250-018-874 FD30-TRM2000SCUM
250-025-160 FD30-TRM2000SCWT
Upper Roller Cover Cap
FD30-TRM2000SCSIL
2730mm 250-017-978
250-017-979 FD30-TRM2730SCUM
250-025-148 FD30-TRM2730SCWT
12
FD30-TRM2730SCSIL
When using the embedded lower guide rail (optional) (P.664)
3000mm 250-018-877
250-018-878 FD30-TRM3000SCUM
250-025-162 FD30-TRM3000SCWT
FD30-TRM3000SCSIL
20
Embedded Lower Guide Rail
3640mm 250-017-982
250-017-983 FD30-TRM3640SCUM
250-025-150 FD30-TRM3640SCWT
FD30-TRM3640SCSIL
15
9.2
Internal mechanism prevents bouncing during closing Prevents the door from bouncing up after the soft close function has been activated.
4000mm 250-018-881
250-018-882 FD30-TRM4000SCUM
250-025-164 FD30-TRM4000SCWT
FD30-TRM4000SCSIL
Recessed Mount
Door Adjustment
1820mm 250-017-807
250-017-808 FD30-TRH1820SCUM
250-025-147 FD30-TRH1820SCWT
FD30-TRH1820SCSIL
Horizontal Adjustment Screw
*
2000mm 250-018-875
250-018-876 FD30-TRH2000SCUM
250-025-161 FD30-TRH2000SCWT
Scale Markings
FD30-TRH2000SCSIL
±3
2730mm 250-017-980
250-017-981 FD30-TRH2730SCUM
250-025-149 FD30-TRH2730SCWT
FD30-TRH2730SCSIL
Loosen
Tighten
±2
3000mm 250-018-879
250-018-880 FD30-TRH3000SCUM
250-025-163 FD30-TRH3000SCWT
Vertical Adjustment Screw
FD30-TRH3000SCSIL
Width 21 *3 (Reference)
After adjusting, tighten the spring up prevention nuts (required parts (2)) using the spanner (included with closer) with a nominal size of 12 until the nuts come into contact with the upper track.
· Can be adjusted with one No. 2 screwdriver. · Scale markings are provided for horizontal adjustment from the end of the door. *Nut to prevent springing up
3640mm 250-017-984
250-017-985 FD30-TRH3640SCUM
250-025-151 FD30-TRH3640SCWT
FD30-TRH3640SCSIL
9.2 23
4000mm 250-018-883
250-018-884 FD30-TRH4000SCUM
250-025-165 FD30-TRH4000SCWT
FD30-TRH4000SCSIL
nh03d03.eps
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online