670
Website for latest info
Installation Dimensions 3-Door Overlapping Specification
Door Width Min. 30 Clearance 7 mm
ϕ 8
2
1 1
3 2
20.3
20
90
90
20
Lower guide rail length
Door Width DW
Opening width RW
ϕ 24
Door Machining Dimensions For Magnet Guide Strike (2), Lower Guide Rail (3) mounting
ϕ 8
25
20
A B
A
B
C
C
Floor Machining Dimensions For Lower Guide Pin (1) mounting
*Drill a φ 24 hole vertically and as accurately as possible. After drilling the holes, remove chips to prevent issues with installation and proper door functionality.
ϕ 24
Equal Pitch P 1 ≤500
200
200
(P 1 )
P 1
P 1
P 1
P 1
Processing Holes of Lower Guide Rail (3)
Height Setting of Magnet Guide Strike (2) 1. Lower the guide pin receiver
Insert a screwdriver, etc. into the hole on the door bottom edge and press the magnet guide strike (2) button. When the button is pressed, the magnet guide strike (2) guide pin receiver will drop automatically.
P 2
P 2
P 2
ϕ 3.5
2
Pitch : P 2 ≤300 Included screws; Pan head tapping screws 3×16 4 pcs
2. Slide door for automatic setting Slide the door slowly over the floor lower guide pin (1). When the magnet guide strike (2) guide pin receiver passes the lower guide pin (1), the guide pin receiver height position will be automatically set ( magnetic height automatic set function ).
· Provide screw holes, with the pitch less than 300 mm · At 30 mm from both ends of rail, provide 3.5 mm dia. hole with drill *Make sure that the track does not deform when cut. After cutting, remove metal scraps and debris from the rail to ensure proper installation and function. Part Mounting to Door Assemble the magnet guide strike (2) on both ends of the door bottom surface. Fit the dimples over the magnet guide strike (2) protrusions to assemble the lower guide track (3). *Be careful to avoid level differences or misalignment at the joint of the magnet guide strike (2) and the lower guide track (3); mount using the included screws. Cross-recessed flat head tapping screws 3×12 2 pcs (Included) 2 3 Protrusion
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online