685
Website for latest info
Installation Example
If there is no margin (DN=0), make the Stripwood of the pocket door removable in order to hang the door.
Door overlap 10 (20 if there is no margin (DN = 0))
Upper Roller Cover Cap (Optional)
Door closed
Position of trigger for leading edge
Rail connecting position
The trigger is installed in a different position from FD30.
187.5 45
Position of trigger for trailing edge
30
361
* 2 The gap between the upper track and the door can be adjusted within a range of -4 mm to +4 mm. * 3 The horizontal position of the door can be adjusted within a range of -2 mm to +2 mm from the end of the door.
30
Door opened
Opening width (RW)
Rail length on opening side (Lo) = RoW
Pocket Door width (RpW) = RW - RoW - DN Rail length on pocket door side (Lp) = RW - RoW
Margin (DN)
Cut Out Dimensions
2 x ϕ 4.5
165
45
ϕ 4.6/ ϕ 7.8
ϕ 4.6/ ϕ 7.8 countersunk
30
30
Leading edge
Trailing edge
20
30
30
30
30
49 16 2 x C5 or greater
51
1 3 2
5 4 1
2
16
Rail connection position
Upper Roller Cover Cap (Optional part)
Door Width DW = RoW + DN + 10 (In case of no margin (DN = 0), door width (DW) = RoW + 20)
49
16 Door thickness (Dt) = 30 or more
7 or more
7 or more
±2
End of door pocket
Embedded Lower Guide Rail (Optional part)
* 3
12
Position of trailing edge at full closed position
Position of leading edge at full opened position
15
12
16 28
10
6
30
44
Pocket Door Upper Track Dimensions With two rails of 860 mm or 1260 mm
Type of Pocket Door Upper Track Included screws: Cross-recessed flat head tapping screws 3.5 x 25
Silver White Item Code Item Name Item Code Item Name Item Code Item Name Amber
Specifications Length
Leading edge
Rail connecting
(1) Pocket Door
Rail length (Opened area) (Lo)
250-035-283 FD30-35EV-TRMP860-SL
250-035-288 FD30-35EV-TRMP860-UM
250-035-293 FD30-35EV-TRMP860-WT
Upper Track 860mm
30 30 20
45
165
Rail connected end
Cut
Surface Mount
30
250-035-284 FD30-35EV-TRMP1260-SL
250-035-289 FD30-35EV-TRMP1260-UM
250-035-294 FD30-35EV-TRMP1260-WT
2 x ϕ 4.5
ϕ 4.6/ ϕ 7.8 countersunk
3 countersunk
1260mm
Rail (Opened area)
Trailing edge
Rail connecting
250-035-285 FD30-35EV-TRMP1860-SL
250-035-290 FD30-35EV-TRMP1860-UM
250-035-295 FD30-35EV-TRMP1860-WT
1860mm
Rail length (Door pocket) (Lp)
30 30
20
Cut
Rail connected end
20
30
250-035-286 FD30-35EV-TRMP2760-SL
250-035-291 FD30-35EV-TRMP2760-UM
250-035-296 FD30-35EV-TRMP2760-WT
ϕ 4.6/ ϕ 7.8 countersunk
3 countersunk
2760mm
Rail (Door pocket)
250-035-287 FD30-35EV-TRMP3960-SL
250-035-292 FD30-35EV-TRMP3960-UM
250-035-297 FD30-35EV-TRMP3960-WT
3960mm
9.4
With one rail of 1860 mm, 2760 mm or 3960 mm
Rail connecting
Rail connecting
Leading edge
Trailing edge
(1) Pocket Door
250-043-802 FD30-35EV-TRHP860-SL
250-043-807 FD30-35EV-TRHP860-UM
250-043-812 FD30-35EV-TRHP860-WT
Rail length (Door pocket) (Lp)
Rail length (Opened area) (Lo)
Upper Track 860mm
30 30 20
45
20
30 30
Cut
Cut
165
Rail connected end
Rail connected end
Recessed Mount
30
30
250-043-803 FD30-35EV-TRHP1260-SL
250-043-808 FD30-35EV-TRHP1260-UM
250-043-813 FD30-35EV-TRHP1260-WT
1260mm
Drill size 2 x ϕ 4.5 as additional leading edge trigger installation hole
3 countersunk holes drilled
ϕ Drill size 4.6/ ϕ 7.8 countersunk as additional rail installation holes
ϕ 4.6/ ϕ 7.8 countersunk
3 countersunk holes drilled
Rail (Opened area)
Rail (Door pocket)
250-043-804 FD30-35EV-TRHP1860-SL
250-043-809 FD30-35EV-TRHP1860-UM
250-043-814 FD30-35EV-TRHP1860-WT
1860mm
Door Adjustment
Internal mechanism prevents bouncing during closing Prevents the door from bouncing up after the soft close function has been activated.
20
250-043-805 FD30-35EV-TRHP2760-SL
250-043-810 FD30-35EV-TRHP2760-UM
250-043-815 FD30-35EV-TRHP2760-WT
2760mm
Horizontal adjustment screw
Scale markings to check position
250-043-806 FD30-35EV-TRHP3960-SL
250-043-811 FD30-35EV-TRHP3960-UM
250-043-816 FD30-35EV-TRHP3960-WT
9.4 24
*
3960mm
±4
Loosen
Tighten
±2
Vertical adjustment screw
After adjusting, tighten the spring-up prevention nuts (required parts (2) and (5)) using the spanner (included with closer) with a nominal size of 12 until the nuts come into contact with the upper track.
*Includes nuts to prevent springing up
· Can be adjusted with one No. 2 screwdriver. · Incremental markings are provided for horizontal adjustment from the end of the door.
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online