705
Website for latest info
Installation Example
Opposite Opening Sliding Doors System with Bumper Block.
* 1 The gap between the upper track and the door can be adjusted within a range of -4 mm to +4 mm. * 2 The horizontal position of the door can be adjusted within a range of -2 mm to +2 mm from the end of the door.
8
Upper Roller Cover Cap (Optional)
24
15.6
4.5 穴
Recessed Mount
Surface Mount
*Additional processing, 4 holes in total 5 hole for Trigger
592.5[594.5]
28
29
215[217]
Hole pitch for upper track 300 DW-412[DW-414]
DT+8
33[35]
30
18
18
3
2
3 1
5
49[51] 33[35]
* 2 ± 2 ⬅ ➡
D W
8
Min. 24
6
7
15
28
5
9
41
64
[ ] indicates the dimensions when the upper roller cover cap (optional) is attached. (( )) indicates the dimensions when thelLower guide L (optional) is attached. Also see the instructions on how to calculate the trigger installation position.
Cut Out Dimensions
16
51
49
2
Upper Roller Cover Cap (Optional part)
16
15
Internal mechanism prevents bouncing during closing Prevents the door from bouncing up after the soft close function has been activated.
Door Adjustment
Types of Upper Track Recommended screws: Cross-recessed flat head tapping screws 3.8 x 40
Horizontal Adjustment Screw
Silver Item Code Item Name
Amber Item Code Item Name
White Item Code Item Name
Upper Tracks Length
*
Scale Markings
(1) Upper Track
1820mm 250-020-766
250-020-767 FD50-TRM1820UM
250-025-174 FD50-TRM1820WT
FD50-TRM1820SIL
±4
2000mm 250-021-177
250-021-178 FD50-TRM2000UM
250-025-177 FD50-TRM2000WT
Loosen
FD50-TRM2000SIL
Tighten
±2
Vertical Adjustment Screw
2730mm 250-020-768
250-020-769 FD50-TRM2730UM
250-025-175 FD50-TRM2730WT
FD50-TRM2730SIL
*Nut to prevent springing up
After adjusting, tighten the spring up prevention nuts (required parts (2)and (5)) using the spanner (included with closer) with a nominal size of 12 until the nuts come into contact with the upper track.
· Can be adjusted with one No. 2 screwdriver. · Scale markings are provided for horizontal adjustment from the end of the door.
28
3000mm 250-021-179
250-021-180 FD50-TRM3000UM
250-025-178 FD50-TRM3000WT
FD50-TRM3000SIL
3640mm 250-020-770
250-020-771 FD50-TRM3640UM
250-025-176 FD50-TRM3640WT
FD50-TRM3640SIL
12
4000mm 250-021-181
250-021-182 FD50-TRM4000UM
250-025-179 FD50-TRM4000WT
FD50-TRM4000SIL
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online