729
Website for latest info
Spacer Block for Convex Corner
Installation
The spacer is used together with a two-way soft closer (recessed and surface mount types). It is required when the upper track is embedded into the upper frame. Cannot be used on the upper track for pocket doors.
Spacer block
Parts
Spacer block
Upper track
Temporary fixing screw (cross-recessed)
Tapping screw 4.5 (cross-recessed)
How to Install
[Step 1] Align the spacer block with the screw hole and tighten the temporary fixing screw.
[Step 2] Remove the screw after checking if the soft closer works properly.
①
① Slide and align the spacer
② Tighten the temporary fixing screw
②
[Step 3] Drill a ϕ 5 hole in the track.
[Step 5] Secure the spacer to the through-hole of the track using a tapping screw with a nominal size of 4.5.
[Step 4] Displace the spacer and clean the inside of the upper track.
Use the threaded holes in the spacer (approx. ϕ 5 with M6 female threads) as guides for drilling ϕ 5 holes. recessed point created by the temporary fixing screws. Drill a hole in the track, aligning it with the
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online