747
Website for latest info
Two-way Damper / Recessed Upper Roller FD80-AFH
Latest Info
NEW
Installation Example
Middle rail (required quantity for rail frames 33 and 34 )
0 pc (no middle rail) 1 pc 2 pcs
3 pcs
The circled numbers indicate part numbers. Refer to the Parts Table as well. (P.748) · Recessed Upper Roller (P.750) · Surface Mounted Upper Roller Two-Way Damper (P.754) · Surface Mounted Upper Roller (P.758) See listed page for details.
Door Height
up to 2200 mm 2201 – 2700 mm
Door Width
784 – 900 mm 901 – 1500 mm
Glass Thickness
5 mm or 6 mm
Door Weight (per door)
Max. 80 kg
- ] 15 24
Height Adjustment
1 mm upward, 4 mm downward
[
• Aluminium frame sliding door hardware for ceiling-recessed upper track doors. • TTwo-Way Damper type mounted, offering slow and quiet opening and closing in both directions. • Thick and unlikely to warp, the aluminium frame supports large doors up to 80 kg. • The aluminium frame uses a slanted edge design to prevent the accumulation of dust.
1
] 4 5
[
2
1
] 10 11
[
- ] 12 14
[
] 4 5
[
TEMPERED GLASS
INSTRUCTION
] 33 34
[
Description • The recommended usage temperature range: 5 °C - 40 °C Caution • The Soft Close mechanism may not function properly if the door is closed either forcefully or extremely slowly. • The door closing speed, as influenced by the Soft Close function, may vary due to room temperature, operating method, and usage environment. • Ensure the frame is strong enough to withstand the forces of opening and closing, and that it is suitable for supporting the door's weight. A frame that lacks sufficient strength can significantly impair door movement and may cause the upper track to fall, posing a serious safety hazard. • When vertical frame is not used, mount a door stopper 32 on the bottom part. • When selecting this product, be sure to read the marking guide for reinforced glass.
- ] 29 31
[
] 10 11
[
] 7 8
[
Mount the lower guide in a position that ensures it does not slide out of the door when fully opened or fully closed.
3
] 7 8
[
Installation
(In track) 41
Trigger Pin
(In track) 41
A-473
Margin DN
DN+50
Trigger Pin
For double sliding doors
272
Min.40 (Overlap DK)
Parts Set: FD80DHCMP-AF 2 sets used
Trigger Pin
DN+50
Door leading position when fully open Door rear position when fully closed
A-473
272
Door Width DW* 4 = (FW+DK) /2 A=DW+DN
Margin DN
Trigger Pin
For single sliding door
Min.40 (Overlap DK)
Margin DN
Door rear position when fully closed Door leading position when fully open
Trigger Pin
Trigger Pin
A-473
272
A=Door Width DW* 4 = (FW+DN+DK) /2
1
- ] 15 24
[
Opening width : FW
A-473
2
40
] 4 5
604.5
[
30
272
Track hole pitch 300
18
18
-1 +4
Height Adjustment * 3
ϕ 5.5
trigger installation hole ϕ 5 *Total 4 locations of upper track additional machining Trigger Pin (2 pcs included)
80
80
- 25 27
Door leading position when fully open
[
]
Min.40 (Overlap DK)
Margin DN
- ] 29 31
[
] 33 34
- ] 12 14
[
- 35 38
[
[
]
2
25
2
25
] 10 11
[
] 7 8
[
3
16
41
28
4 × ϕ 4.5
9
4.5 × 9.5 oval
5
64
For the glass height, door height, and finished opening height, see the drawings in the standard specifications. (P.750)
*3 The gap between the upper track and the door can be adjusted within a range of -1 mm to +4 mm. *4 Door width DW dimension includes the edge cover. Figures in <> are the dimensions with side frame (slim).
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online