750
Website for latest info
Recessed Upper Roller FD80-AFH
Latest Info
NEW
[Installation Example]
Middle rail (required quantity for rail frames 33 and 34 )
0 pc (no middle rail) 1pc 2 pcs 3 pcs
The circled numbers indicate part numbers. Refer to the Parts Table as well. (P.751) ·Two-way Damper / Recessed Upper Roller (P.747) ·Surface Mounted Upper Roller Two-Way Damper (P.754) ·Surface Mounted Upper Roller (P.758) See listed page for details.
2201 – 2700 mm
Door Height
up to 2200 mm
Door Width
784 – 900 mm 901 – 1500 mm
Glass Thickness
5 mm or 6 mm
Door Weight (per door)
Max. 80 kg
- ] 15 24
[
Height Adjustment
1 mm upward, 4 mm downward
2
• Aluminium frame sliding door hardware for ceiling-recessed upper track doors. • Thick and unlikely to warp, the aluminium frame supports large doors up to 80 kg. • The aluminium frame uses a slanted edge design to prevent the accumulation of dust. • Black frames are now available.
] 4 5
[
2
] 10 11
[
1
• White upper tracks are now available. • Side frames (slim) are now available.
] 4 5
[
- ] 12 14
[
TEMPERED GLASS
INSTRUCTION
Caution • Ensure the frame is strong enough to withstand the forces of opening and closing, and that it is suitable for supporting the door's weight. A frame that lacks sufficient strength can significantly impair door movement and may cause the upper track to fall, posing a serious safety hazard. • When installing a door that does not make contact with the side jambs, secure a door stopper to the floor to prevent the door from sliding out of the track. • When selecting this product, be sure to read the marking guide for reinforced glass.
] 33 34
[
] 10 11
[
] 7 8
[
- ] 12 14
[
Installation
3
] 7 8
[
Mount the lower guide in a position that ensures it does not slide out of the door when fully opened or fully closed.
Min.40 (Overlap DK)
4.5 × 9.5 oval
Margin DN
- ] 15 24
] 4 5
4 × ϕ 4.5
[
[
3
Door Leading Position When Fully Open
Door Rear Position When Fully Closed
] 4 5
[
Glass Thickness = Door Width -38 Door Width DW* 3 = (FW+DN+DK) /2 Opening Width : FW
30
Track hole pitch 300
1
1
ϕ 5.5
] 4 5
[
40
2
] 4 5
2
[
] 10 11
80
80
[
25
28
[
-
]
29 31 [ - ]
- ] 29 31
- ] 12 14
[
[
- ] 12 14
[
] 33 34
[
] 33 34
[
- ] 35 38
[
-1
Height Adjustment
25
2
2
25
] 10 11
+4
[
3
- ] 25 28
[
] 7 8
] 7 8
[
[
64 9 5 41
*2 The gap between the upper track and the door can be adjusted within a range of -1 mm to +4 mm.
*3 Door Width DW dimension includes the edge cover. Figures in <> are the dimensions with side frame (slim).
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online