754
Website for latest info
Surface Mounted Upper Roller Two-Way Damper FD80-AFH
Latest Info
NEW
The circled numbers indicate part numbers. Refer to the Parts Table as well. (P.755) ·Two-way Damper / Recessed Upper Roller (P.747) ·Recessed Upper Roller (P.750) ·Surface Mounted Upper Roller (P.758) See listed page for details. [Installation Example]
Middle rail (required quantity for rail frames 31 and 32 )
0 pc (no middle rail) 1 pc 2 pcs
3 pcs
Door Height
up to 2200 mm 2201 – 2700 mm
Door Width
804 – 900 mm 901 – 1500 mm
Glass Thickness
5 mm or 6 mm
Door Weight (per door)
Max. 80 kg
Height Adjustment
4 mm upward, 4 mm downward
- ] 13 22
[
• Aluminium frame sliding door hardware for ceiling-surface mounted upper track doors. • Two-Way Damper type mounted, offering slow and quiet opening and closing in both directions. • Thick and unlikely to warp, the aluminium frame supports large doors up to 80 kg. • The aluminium frame uses a slanted edge design to prevent the accumulation of dust. • Black frames are now available.
] 5 6
[
2
1
] 8 9
[
1
- ] 10 12
[
• White upper tracks are now available. • Side frames (slim) are now available.
] 5 6
[
] 31 32
[
TEMPERED GLASS
INSTRUCTION
- ] 10 12
Description • The recommended usage temperature range: 5 °C - 40 °C Caution • The Soft Close mechanism may not function properly if the door is closed either forcefully or extremely slowly. • The door closing speed, as influenced by the Soft Close function, may vary due to room temperature, operating method, and usage environment. • Ensure the frame is strong enough to withstand the forces of opening and closing, and that it is suitable for supporting the door's weight. A frame that lacks sufficient strength can significantly impair door movement and may cause the upper track to fall, posing a serious safety hazard. • When installing a door that does not make contact with the side jambs, secure a door stopper to the floor to prevent the door from sliding out of the track. • When selecting this product, be sure to read the marking guide for reinforced glass.
[
] 5 6
[
] 8 9
[
3
] 5 6
[
Mount the lower guide in a position that ensures it does not slide out of the door when fully opened or fully closed.
Installation
Margin DN
A-483
Trigger Pin
For double sliding doors
Trigger Pin
282
Min.40 (Overlap DK)
DN+60
Parts Set: FD80DHCMP-AF 2 sets used
Trigger Pin
Door leading position when fully open
DN+60
282
A-483
Trigger Pin
Door rear position when fully closed
Door Width DW* 3 = (FW+DK) /2
Margin DN
A=DW+DN
39
(In track)
(In track) 39
4 × 5.2 × 8.2 oval
For single sliding door
Min.40 (Overlap DK)
Margin DN
Trigger Pin
Door leading position when fully open
7
12 72
282
12
A-483
Trigger Pin
Door rear position when fully closed
A=Door Width DW* 3 = (FW+DN+DK) /2
1
2
Opening width : FW
A-483
604.5
- ] 13 22
40
[
282
Track hole pitch 300
18
30
18
ϕ 5.5
Trigger Installation Hole ϕ 5 *Total 4 locations of upper track additional machining Trigger Pin (2 pcs included)
4
35
35
- ] 23 26
Door leading position when fully open
[
90
90
Margin DN
Min.40 (Overlap DK)
18 - 27 29
[
]
] 31 32
- 10 12
[
[
]
- ] 33 36
] 8 9
[
[
2
25
25
2
] 5 6
[
3
16
41
4 × ϕ 4.5
9
4.5 × 9.5 oval
5
64
28
For the glass height, door height, and finished opening height, see the drawings in the standard specifications. (P.758)
*2 The door position can be adjusted vertically within a range of -4 mm to +4 mm. *3 Door Width DW dimension includes the edge cover. Figures in <> are the dimensions with side frame (slim).
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online