83
Website for latest info
CONCEALED HINGE
Inset / 93°opening 360
Latest Info
NEW
Cup size: ϕ 35 / Bore Depth: 11 mm / Door Thickness: 15-20 mm 3D adjustment: Depth: +1.5, -2.5 mm, Vertical: ±2.5 mm, Overlay: +0, -4 mm Sold separately • Mounting plates • Glass door face plate • Countersank head tapping screw 3.5 × 15NI • Other Recommended screws • Countersank head wood/tapping screw 3.5
With damper function (5 levels) Passed Private 200K Cycle Test
Feature Installation
Damper power adjustment lever
The picture above shows a combination of a concealed hinge (with damper) and a mounting plate (sold separately).
93°opening Inset
Door Thickness 15 - 20mm
The installation drawing and locus chart shown are for a 20 mm thick door and side panel, a 5mm bore distance and inset installation.
Side panel Thickness 20
Installation drawing
Locus chart S=1/1
17
20
24.3 23.9
0.2
Bore Distance (C) O.C. (B)
O.C. (A)
5
2x ϕ 4 ϕ 8
27
47 30 16.8
(35.4)
24.3
(42)
Side panel Thickness 20
0 Door Gap (b)
ϕ 35
5
Bore Distance (C)
Drawings show a hinge, face plate and 360-P4W-30T mounting plate (sold separately).
90°
Cut out dimensions (wooden doors)
Clearances for door edge O.C. (A) and hinge side O.C. (B) are necessary. O.C. (A) and (B) change depending on door thickness and bore distance (C). Refer to locus chart and tables below when designing cabinets. Opening Clearance (O.C.)
27
Bore Distance (C)
Door
Opening clearance (B), door thickness (D) and bore distance (C) relationship
17.5+ Bore Distance (C)
Bore Distance (C)
Front edge
Door Thickness (D)
3
4
5
15
0
0
0
16
0
0
0
17
0
0
0
18
0
0
0
19
0.1
0.1
0.1
20
0.3 0.5
0.3 0.4 0.7
0.2 0.4 0.7
Depth 11mm
21* 22*
1.0
37
O.C. (B)
• The table above shows O.C. (B) for C1 chamfering (chamfer plane). * Please refer to the locus chart if door thickness is over 20mm. O.C. (B) can be made smaller by R chamfering (round chamfer) and C chamfering (chamfer plane) on the door.
Bore distance (C) and Door Gap (b) relationship
Opening clearance (A) and door width relationship (for 20mm thick door)
Door Width
300 0.44
Bore Distance (C)
3 2
4 1
5 0
400 0.32
500 0.25
600 0.21
O.C. (A)
Door Gap (b)
Door Gap (b) adjustment (+4mm) by turning the overlay adjustment screw. Please check required O.C. (B) at the table below.
Item Code 160-026-843 160-026-839 160-026-835 160-042-392
Item Name 360-D26-0T 360-26-0T 360-C26-0T 360-U26-0T
Opening Angle
Type
Material
Finish
Carton 100 pcs
With damper (5 levels)
Without catch
93°
Steel
Nickel
With catch
200 pcs
Sprung-open
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online