86
Website for latest info
CONCEALED HINGE
Thick doors Inset / 93°opening H360
Latest Info
NEW
Cup size: ϕ 40 / Bore Depth: 15 mm / Door Thickness: 18-30 mm 3D adjustment: Depth: +1.7, -2.8 mm, Vertical: ±2.5 mm, Overlay: +0, -4 mm Sold separately • Mounting plates • Countersank head tapping screw 3.5 × 15NI Recommended screws • Countersank head wood/tapping screw 3.5
With damper function (5 levels) Passed Private 100K Cycle Test
Feature Installation
Damper power adjustment lever
The picture above shows a combination of a concealed hinge (with damper) and a mounting plate (sold separately).
93°opening Inset
Thick doors Door Thickness 18 - 30mm
The installation drawing and locus chart shown are for a 30 mm thick door and side panel, a 8mm bore distance and inset installation.
Installation drawing
Locus chart S=1/1
Side panel Thickness 30 0.5 Door Gap (b)
O.C. (A)
20.5
22
8
0.8 Bore Distance (C) O.C. (B)
32.6 33.2
31.5
2x ϕ 4 ϕ 8
18.2 47 30
Side panel Thickness 30
(45.1)
33.2
(51)
gap 0.5
ϕ 40
8 Bore Distance (C)
Drawings show a hinge, face plate and 360-P4W-30T mounting plate (sold separately).
93°
Cut out dimensions (wooden doors)
Clearances for door edge O.C. (A) and hinge side O.C. (B) are necessary. O.C. (A) and (B) change depending on door thickness and bore distance (C). Refer to locus chart and tables below when designing cabinets. Opening Clearance (O.C.)
31.5
Bore Distance (C)
Door
20+ Bore Distance (C)
Opening clearance (B), door thickness (D) and bore distance (C) relationship
Bore Distance (C)
Front edge
Door Thickness (D)
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
8 0 0 0
18 20 22 24 26 28 30
0.1 0.3 1.7 3.9 5.9 8.1
0.1 0.3 0.7 2.9 4.9 7.1
0.1 0.3 0.5 2.0 3.9 6.1
0.1 0.3 0.5 1.4 3.3 5.1
0.1 0.3 0.5 0.8 2.6 4.5
0.1 0.3 0.5 0.8 2.1 3.9
Depth 15mm
32* 34*
42.5
O.C. (B)
• The table above shows O.C. (B) for C1 chamfering (chamfer plane). * Please refer to the locus chart if door thickness is over 30mm. O.C. (B) can be made smaller by R chamfering (round chamfer) and C chamfering (chamfer plane) on the door.
Bore distance (C) and Door Gap (b) relationship
Opening clearance (A) and door width relationship (for 30mm thick door)
Door Width
300 0.78
Bore Distance (C)
3
4
5
6
7
8
400 0.55
500 0.43
600 0.35
Door Gap (b)
O.C. (A)
5.5 4.5 3.5 2.5 1.5 0.5
Door Gap (b) adjustment (+4mm) by turning the overlay adjustment screw. Please check required O.C. (B) at the table below.
Item Code 160-029-086 160-029-083 160-029-080
Item Name
Opening Angle
Type
Material
Finish
Carton
H360-D26-0T H360-26-0T H360-C26-0T
With damper (5 levels)
93°
Without catch
Steel
Nickel
100 pcs
With catch
No.500 Catalogue
This information provides a range of quality for the component. It does not ensure the performance or safety of the final product incorporating the component.
Made with FlippingBook - professional solution for displaying marketing and sales documents online