The opinions expressed herein do not necessarily reflect those of the National Street Rod Association and/or StreetScene Magazine.
Vapor Lock
H ave you ever experienced a vapor lock in your street rod? If you live in the South where the heat and humidity are part of everyday life, a vapor lock can occur on a simple hot summer drive. We have experienced vapor lock a few times over the years so being the curious me, I did some research to see if I could get a better understanding of vapor lock causes, how to prevent it, and to learn the safety concerns. So, what is a vapor lock? It is a fuel delivery failure that occurs when liquid gasoline turns into vapor inside the fuel system before reaching the engine. Because fuel pumps and injec- tors are designed to move liquid, not vapor, the presence of fuel vapor interrupts normal fuel flow. The result is hard starting, stalling, hesitation, or complete engine shutdown. Vapor lock is most common in older carburet- ed vehicles, but under extreme conditions it can affect modern fuel-injected systems as well. Vapor lock occurs when fuel becomes hot enough to boil inside the fuel lines or pump. Several conditions contribute to this: Extreme ambient heat or direct sunlight on the vehicle; fuel lines routed too close to exhaust manifolds or headers; mechanical fuel pumps suffering from heat sink if mounted on an overly hot engine block; long idle time in heavy traffic (heat builds up without adequate air flow); using winter-blend gaso- line in summer (higher volatility);
multiple cooling cycles, log onto nsra-usa.com for a copy of the NSRA Fellow Pages because you’ll probably need roadside assistance. While vapor lock itself does not damage the engine, it can create dangerous situations including; loss of power while driving or sudden stalling in traf- fic can increase the risk of colli- sions, and the reduced ability to accelerate during passing or merging can be hazardous. A stranded vehicle, if the engine will not restart, means the driver may be stuck in unsafe locations. Vapor lock does not directly cause fires, but the conditions that lead to vapor lock—high heat, fuel system stress, and potential leaks can increase fire risk if the system is already com- promised. For modern fuel-inject- ed vehicles vapor lock is rare and usually indicates overheating, fuel pump failure, or a fuel sys- tem restriction. These issues should be treated as safety con- cerns and repaired promptly. In summary, vapor lock is a fuel delivery failure caused by gasoline boiling inside the fuel system and is most common in older carbureted vehicles. Prevention focuses on maintain- ing fuel pressure, reducing heat exposure, and using proper fuel blends. While vapor lock itself is not destructive, it can create dangerous driving situa- tions and should be addressed immediately. Carol Barnhill Arkansas State Inspector
weak or failing fuel pump with insufficient pressure; and high- altitude driving (lower atmos- pheric pressure lowers fuel boil- ing point). Symptoms include engine sputtering or stumbling at low speed or idle, sudden loss of power while driving, or the engine simply stalls—especially after a heat soak (sitting after running for a long time). It’s hard, or impossible, to restart an engine that is so hot vapor lock occurs. Usually these symptoms resolve on their own after the engine cools for 20–30 minutes. So what to do if you are cruis- ing down the interstate this sum- mer and these conditions occur? First, pull over safely and turn off the engine immediately. Open the hood to allow heat to escape the engine bay and move the vehicle out of direct sunlight if possible. Wait 20–30 minutes for the fuel to cool and re-condense back into liquid. You can speed up the cooling process (optional) by applying a cold, damp cloth or pour a small amount of cold water over the fuel pump and fuel lines, being careful not to get electrical com- ponents, connectors, or the igni- tion system wet. Once cooled, crank the engine without press- ing the gas pedal, you don’t want to flood the engine with gasoline. If carbureted, press the gas pedal fully to the floor once and release it, then crank. This clears a flooded carburetor and allows a clean restart attempt. If the vehicle will not restart after
100 OCTOBER 2026
Made with FlippingBook - Online magazine maker