/
KM Mini Hanger
The KM hanger is used to support joists and trusses where a compact economical connector is required. Features & Benefits — New and improved design achieves higher load carrying capacities — Additional side fixings allow for increased upliftcapacity — Optional triangular holes for increased performance on solid headers — Rear location tab to assist with installation
Material Specification — Galvanised mild steel – Z275
Fixings
Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
Available Sizes
Dimensions (mm)
Product Code
Hanger Width (W) (mm)
Hanger Depth (H) (mm)
30
KM–38 KM–44 KM–50
38 44 50
49 46 43
30
In Situ
H
W
55
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)**
Minimum Supported Depth (mm) to achieve Full Uplift Capacity
Product Code
Minimum Supporting Depth (mm)
Solid Timber Header (Min TR26/C27)
Header
Incoming
Uplift
KM–38 KM–44 KM–50
49 46 43
49 46 43
6
4
2.20
3.41
**Values obtained from tests carried out by ITW Construction Products Offsite and calculated in accordance with ETAG 015. Values apply to new design only. Please contact Technical Support for further information if required.
The latest most up to date version will always be online and not in print or in downloaded pdf.
102
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker