/
TS Truss Shoe
The TS hanger is designed to support trussed rafters from primary girders. Features & Benefits — 4 sizes available to suit standard single or double trussed rafters — Allows design loading to be effectively transferred without local over stressing — The high performance nail configuration minimises any direct deflection or rotation caused by the incoming truss not abutting the primary girder
UKTA–21/0009 UKTA - 21/0009
ETA–20/1000
Material Specification — Galvanised mild steel – Z275
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
55
W
Available Sizes
Dimensions (mm)
55
Dimensions (mm)
Minimum Header Depth* (mm)
Product Code
(W)
(H)
(F)
TS–38 TS–50 TS–75 TS–100
120 120 120
38 50 75
256 250 237 225
120 114 101
89
100
89
H
**When timber depth is shallower than ‘F’ dimension a timber packer is required.
F
Nail packer to truss with 3No fixings into front ply, 3No fixings into rear ply using Paslode annular ring shank 2.8 x 63mm.
75
In Situ
Standard Installation:
Face Fix Installation:
Single Leg Face Fix Installation:
With Packer Installation**:
50
50
Timber depth greater than ‘F’ dimension
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
Product Code
Solid Timber Header (Min C20)
Header
Incoming
Uplift
TS–38, TS–50, TS–75, TS–100
18
6
5.62
15.52
The latest most up to date version will always be online and not in print or in downloaded pdf.
104
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker