/
VHGG
The VHGG hanger is designed to support multiple ply girder trusses from a vertical web in very high load situations. Features & Benefits — Fixings into vertical web only therefore no requirement for increased bottom chord depths — Additional side fixings allows for greater uplift capacity
Very Heavy Girder To Girder
UKTA–21/0008 UKTA - 21/0008
ETA–20/0999
Material Specification — Zinc undercoated
Fixings 4No M20 Bolts – 180mm long fully threaded (inc nut, round washer, form G washer) supplied with part**
Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
Available Sizes
2,500
Product Code VHGG–80 VHGG–102 VHGG–118 VHGG–153 VHGG–200
Incoming Truss Width
Hanger Width (W) (mm)
*For use with Paslode PPNXi **Please specify 240mm long bolts when connecting to 4 ply 47mm header members
2No 35 (2) 2No 47 (2) 3No 35 (3) 3No 47 (3) 4No 47 (4)
80
102 118 153 200
(2)(3)(4) Trusses must be connected together to act as a single unit
Enhanced Uplift
Dimensions (mm)
In Situ
W
80
MIN 145MM
80
80
MIN 40MM
633
MIN 30MM
360
633
197
147
97
(Plates omitted for clarity)
150
Fixing (3.4 x 35mm)
Characteristic Capacity (kN)
Minimum Truss Bottom Chord Depth (mm)
— Minimum edge distances must be met to achieve full capacity. — Please ensure vertical end members are stepped back to allow room for bolt heads. — Supported member should be positioned to the back of the hanger. — Maximum allowable gap of 3mm.
Incoming
Uplift
97
8
4.67 8.49
147 197
10 12 12
14.72 14.72
Vertical
Load Data
Fixings
Characteristic Capacity (kN)
Solid Timber Header (Min TR26)
Header
Incoming
Product Code
Uplift
Nails (3.4 x 35mm)
Min 2 Ply 35mm Header
Min 2 Ply 47mm Header
Bolts M20
VHGG–80, VHGG–102, VHGG–118, VHGG–153, VHGG–200
4
8
4.67
66.50
80.20
The latest most up to date version will always be online and not in print or in downloaded pdf.
107
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker