KHL Kwiki Hanger Long Leg
The KHL hanger is a long leg hanger designed for simple solid timber to timber connections. Features & Benefits — Adjustable leg length accommodates varying timber depths — Solution for dropped/underslung applications
UKTA–21/0009 UKTA - 21/0009
European Community Registered Design
Material Specification — Galvanised mild steel – Z275
ETA–20/1000
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
Dimensions (mm)
Available Sizes
Minimum Header Depth (mm)
Hanger Width (W) (mm)
Hanger Depth (H) (mm)
Stirrup Height (F) (mm)
Product Code
KHL–39 KHL–50 KHL–75 KHL–92 KHL–100 KHL–150
190 190 170 170 170 140
38 50 75 92
481 475 462 454 450 425
182 176 163 156 151 126
H
100 150
F
50
W
In Situ
Standard Installation
Dropped Installation
Product not suitable for use with Open Web Joists.
When supporting I-Joists, the stirrup height “F” must be a minimum 60% of the I-Joist depth and full depth stiffeners must be fixed to both sides of the I-Joist web (refer to NHBC Standards Section 6.4). When used to support solid timber joists, NHBC guidance states that the timber must be the full depth of the hanger i.e. the timber must be at minimum the same depth as the stirrup height “F” (refer to NHBC Standards Section 6.4).
MAX 100MM
(plates omitted for clarity)
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
Product Code
Solid Timber Header (Min TR26/C27)
Header
Incoming
Uplift**
KHL–39, KHL–50, KHL–75, KHL–92, KHL–100
34
5
4.64
18.00
KHL–150
34
5
4.64
15.04
**Supported timber must be at least stirrup height to achieve full uplift capacity. For reduced fixing capacity please contact Cullen Technical.
The latest most up to date version will always be online and not in print or in downloaded pdf.
112
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcoe.com
Made with FlippingBook Annual report maker