/
TC Truss Clip
The TC is our standard truss clip for securing trussed rafters to single wall plates. Features & Benefits — Eliminates damage from skew nailing into the wall plate
UKTA–21/0009 UKTA - 21/0009
Material Specification — Galvanised mild steel – Z275
ETA–20/1000
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
100
Available Sizes
Dimensions (mm)
Product Code
Truss Width (mm)
TC–38 TC–50
35
44–47
107
32
In Situ
2No truss clips***
1No truss clip***
Incorrect Installation
1
3
1
MIN 38MM
MIN 38MM
2
2
Do not install truss clips horizontally onto the wall plate.
3
***Also suitable to fix to the outside of the wall plate depending on truss heel detail. (Plates omitted for clarity)
Load Data
Characteristic Capacity (kN)
Fixings (3.4 x 35mm)
Product Code
Load Direction
Solid Timber Header (Min C16)
Header
Incoming
1 2 3 4
5.13 (10.26**) 2.00 (4.00**) 0.70 (2.37**) 1.67 (2.37**)
TC–38/TC–50
6
6
**Values for 2No truss clips.
The latest most up to date version will always be online and not in print or in downloaded pdf.
121
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker