/
SS
Slide Shoe
The SS allows for a secure fixing and horizontal movement between raised tie/scissor trusses and the wallplate. Features & Benefits — Provides a maximum of 26mm lateral movement without compromising its resistance to uplift
UKTA–21/0009 UKTA - 21/0009
ETA–20/1000
Material Specification — Galvanised mild steel – Z275
Fixings Code
Description
Box Qty
Slide Shoe
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
Plate (Supplied with SS)
*For use with Paslode PPNXi
Available Sizes
Dimensions (mm)
W
Product Code
Truss Width (mm)
Hanger Width (W) (mm)
SS–38 SS–50 SS–75 SS–100 SS–150 SS–200
35 47
38 50 75
60
70 (2 ply 35) 94 (2 ply 47) 141 (3 ply 47) 188 (4 ply 47)
100 150 200
100
44
Installation Instructions
Typically used on one or both ends of the truss as determined by the Truss Designer.
Stage 1
Stage 2
Stage 3
Tap bearing plate into position on underside of truss bearing area
Position the slide shoe on the wall plate and nail to either face with 6No 3.4x35mm square twist nails
Nail to the top of the wall plate with 4No 3.4x35mm square twist nails
Stage 4
Stage 5
**Allows the rafter to deflect and therefore there is no horizontal thrust transferred into the wall head
Nail to innermost point**
1
2
Locate truss in position
Nail through side flanges into the rafter with 6No 3.4x35mm square twist nails
Load Data
Characteristic Capacity (kN)
Load direction
Fixings (3.4 x 35mm)
Product Code
Solid Timber Header (Min TR26)
Header
Incoming
1 2
4.10 2.60
SS–38, SS–50, SS–75, SS–100, SS–150, SS–200
10
6
The latest most up to date version will always be online and not in print or in downloaded pdf.
126
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker