/
RST Restraint Strap Twist
The RST is a high performance strap which can be used to resist uplift.
Applications can be found on pages 130,132 and 133
Part of the Cullen Gable Restraint System – Pg132 - 133 Features & Benefits — Unique geometry allows a fixing on two planes without the clash issues of standard twist straps — Suitable for timber frame and masonry walls — Can be used independently or in addition to truss clips/framing anchors/hangers (see page 130) — Also a suitable strap for providing lateral restraint to timber gables (see page 132)
RST–1
Material Specification — 30 x 1.2mm Galvanised mild steel – Z275
Fixings To be specified by building designer
RST–2
Dimensions (mm)
Y
RST–3
RST-1
Available Sizes
4mm dia fixing holes
Dimensions (mm)
RST-2
Product Code
X
Y
Z
RST–1 RST–2 RST–3
405 848
205 275 275
200 573
1350
1075
6mm dia fixing holes
RST-3
Fixing Hole Qty
Product Code
4mm Ø
6mm Ø
X
Y 6 8 8
Z 3 8
RST–1 RST–2 RST–3
Z
15
Load Data
Performance
Tensile Capacity (kN)
Characteristic Tensile Capacity (kN)
Strap only
7.50
11.80
Performance
Fixings (3.4x35mm)
Characteristic Capacity (kN)
3 4 5
5.69 6.23 6.76
Strap attached to truss/solid timber (Min. C16)
The latest most up to date version will always be online and not in print or in downloaded pdf.
135
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker