/
Scan or click to view installation videos
GRB Gable Restraint Bracket
Patent granted: EP567179
The GRB is an engineered bracket that has been designed to provide a verified connection between a timber gable and masonry wall when used in conjunction with the Cullen Gable Restraint System*. Part of the Cullen Gable Restraint System – Pg134 - 135 Features & Benefits — Following the details from the system means no external engineering checks — Safely transfers the loads into the roof diaphragm
Available Sizes
Material Specification — Galvanised mild steel – Z600
Wall Plate Depth (mm) Minimum Maximum
Product Code
Block Work Width (mm)
GRB–100
100
38
100
Approvals — Meets NHBC Technical requirements* — Designed to meet Class 1 & Class 2A buildings of Approved document A*
In Situ
Fixings 3.5 x 40mm Wood Screw – supplied by others *To meet the requirements of the NHBC the GRB must be installed as a complete system with all associated products and fixings – Full specification and details of the Cullen Gable Restraint System can be found on pages 132 & 133.
Gable panel Timber wallplate Mortar bed
Please note the GRB forms part of a system and must be used in conjunction with the system straps and fixings as shown on Pages 133-134
Gable restraint bracket
Installation Instructions
Masonry wall
Components:
Gable restraint brackets placed on wall at 1200mm** maximum centres (no fixings required). **For buildings up to 3 storey England & Wales and 2 storey Scotland
10mm maximum mortar bed on wall prior to wallplate being fixed.
38–100mm deep wallplate bedded on mortar and fixed to gable restraint brackets with 3.5x40mm wood screws (2 no. per bracket).
— Wallplate — Mortar — Gable Restraint Brackets — Wall
The latest most up to date version will always be online and not in print or in downloaded pdf.
136
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker