/
Very High Load Masonry Hanger M–STD/M–RTN
The Masonry Standard and Masonry Return hangers are used to support joists and trusses from masonry walls in very high load situations. Features & Benefits — Partial penetration butt welds allow for greater performance over FMHI hanger — Available in 2 thickness options to accommodate higher loads — Return option available to keep hanger tight to masonry wall Material Specification — 6mm & 8mm mild steel with zinc phosphate undercoat and an organic bituminous top coat to BS EN845–1:2013+A1:2016 Fixings Fixings required into incoming member only. No fixings required into masonry.
MASONRY–STD
Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
Dimensions (mm)
MASONRY–STD
MASONRY–RTN
R
100
300
300
15
15
MASONRY–RTN
H
H
Available Sizes Hanger Widths (mm): 39 – 300 Hanger Depths (mm): 150 – 400 Return Widths (mm): 100 – 250
150
150
W
W
M–STD–THICKNESS–W–H Example: M–STD–6MM–100–225
M–RTN–THICKNESS–W–H–R Example: M–RTN–8MM–100–225–100
Contact Technical Support for skewed and straddle options
Load Data
Characteristic Capacity (kN)
Fixings (3.4 x 35mm)
Masonry Above (Min 675mm)
Hanger Type
Masonry Crushing Strength
Uplift**
Incoming
2.8N/mm 2
3.5N/mm 2
7.0N/mm 2
Padstone (Min C30)
Masonry–Std–6mm Masonry–Rtn–6mm Masonry–Std–8mm Masonry–Rtn–8mm Masonry–Std–6mm Masonry–Rtn–6mm Masonry–Std–8mm Masonry–Rtn–8mm
Yes Yes Yes Yes
6 6 6 6 6 6 6 6
2.00 2.00 2.00 2.00 0.00 0.00 0.00 0.00
30.00 30.00 40.00 40.00 30.00 30.00 40.00 40.00
38.00 38.00 42.00 42.00 38.00 38.00 42.00 42.00
50.00 50.00 50.00 60.00 50.00 50.00 50.00 60.00
50.00 70.00 50.00 90.00 50.00 70.00 50.00 90.00
No No No No
The latest most up to date version will always be online and not in print or in downloaded pdf.
21
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker