/
RA Range Restraint Angle Range
The RA hanger range comprises of 3 hangers to suit all applications: the RA, HRAD and RADS. This is a timber to masonry hanger range designed for use with I–Joists, Open Web Joists, LVL & Glulam. The hangers provide lateral restraint (1) and require no masonry above to perform to their full capacity. Features & Benefits — Provides lateral restraint ( (1) equivalent to restraint straps at 2m centres. Additional straps required for buildings over 2 storeys or openings greater than 600mm) — No coursing option required as RA range supports joists on top of previous block course, allowing joist to be built in at one end without adjustment — Supporting block work only needs to cure for 3 days instead of the standard 28 days for traditional masonry hangers, speeding up the build process
RA (For single joists up to 100mm wide)
Material Specification — Galvanised mild steel – Z600
HRAD
(For double joists & high loads)
Fixings Fixings required into incoming member only. No fixings required into masonry.
Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
RADS
(For skewed applications between 30 – 87.5º)
Height Suitability **
297
297
232
232
HRAD–240 (To suit 235–245 deep I–Joists) (To suit 253–254 deep Open Web Joists)
RA–240 (To suit 235 – 245 deep I–Joists) (To suit 253 – 254 deep Open Web Joists)
RA–300 (To suit 300 – 302 deep I–Joists) (To suit 304 deep Open Web Joists)
HRAD–300 (To suit 300–302 deep I–Joists) (To suit 304 deep Open Web Joists)
**Also applies to RADS hangers
The latest most up to date version will always be online and not in print or in downloaded pdf.
24
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker