/
Universal Hanger UH (I–Joist Applications)
Standard Installation – I–Joist Header without Backer Block
See Page 53 For Installation Instructions
— Fill all red holes as indicated for this installation — No backer block required — No web stiffeners required* — Top tabs to be wiped over and nailed — Additional triangular holes into face only required for solid headers *Additional triangular holes into incoming joist only required for enhanced uplift. (for details see page 51)
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
Hanger Depth (mm)
Header
I–Joist Header
Incoming
Uplift
(Depth Dependent Only)
Face
Top
Solid Flange
LVL Flange
195 220 235 300
8 8 8 8
2 2 2 2
2 4 4 4
1.98 3.97 3.97 3.97
11.13 11.13 11.89 11.89
12.94 12.94 11.79 11.79
Enhanced Installation – I–Joist Header with Backer Block
SNAP OFF OPTION
See Page 53 For Installation Instructions
— Fill all red holes as indicated for this installation — All nail holes filled into backer block (including triangular) — Backer block required to hanger side only (follow I–joist manufacturer’s guidelines) — No web stiffeners required when using same hanger/joist depth* — Top tabs to be wiped over and nailed or snapped off to give face fix only option
*Additional triangular holes into incoming joist only required for enhanced uplift. (for details see page 51)
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
Hanger Depth (mm)
Header
I–Joist Header
Incoming
Uplift
(Depth Dependent Only)
Face
Top
Solid Flange
LVL Flange
195 220 235 300
14 18 18 22
2 (0**) 2 (0**) 2 (0**) 2 (0**)
2 4 4 4
1.98 3.97 3.97 3.97
13.09 19.66 19.66 21.02
13.49 18.81 18.81 20.88
**No fixings required when using snap off option.
The latest most up to date version will always be online and not in print or in downloaded pdf.
50
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker