/
UH (I–Joist Applications)
Universal Hanger
Enhanced Installation – Solid Header
SNAP OFF OPTION
— Fill all red holes as indicated for this installation — All nail holes filled into solid header (including triangular) — No web stiffeners required when using same hanger/joist depth* — Top tabs to be wiped over and nailed or snapped off to give face fix only option
*Additional triangular holes into incoming joist only required for enhanced uplift. (for details see below)
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
Hanger Depth (mm)
Header
Solid Header
(Depth Dependent Only)
Incoming
Uplift
GL (Min GL28h)
Face
Top
LVL
195 220 235 300
14 18 18 22
2 (0**) 2 (0**) 2 (0**) 2 (0**)
2 4 4 4
1.98 3.97 3.97 3.97
16.84 19.69 22.16 22.16
15.25 18.65 21.58 22.17
**No fixings required when using snap off option.
Enhanced Uplift
— Fill all red holes as indicated for this installation — Fixings into the incoming joist are required to resist uplift — Increased uplift figures can be achieved by nailing the additional triangular nail holes into the incoming member – solid incoming or web stiffeners are required
Load Data
Hanger Depth (mm)
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
(Depth Dependent Only)
Incoming
Uplift
195
6 8
5.97 7.97
220 – 300
195MM
220 – 300MM
Near side
Far side
The latest most up to date version will always be online and not in print or in downloaded pdf.
51
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker