/
Mini Hanger KM
The KM hanger is used to support joists where a compact economical connector is required. Features & Benefits — New and improved design achieves higher load carrying capacities — Additional side fixings allow for increased upliftcapacity — Optional triangular holes for increased performanceon solid headers — Rear location tab to assist with installation
Material Specification — Galvanised mild steel – Z275
Approvals — Meets NHBC Technical Requirements
Fixings Code
Available Sizes
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
Product Code
Hanger Width (W) (mm)
Hanger Depth (H) (mm)
2,500
KM–50
50
43
*For use with Paslode PPNXi
Dimensions (mm)
In Situ
30
30
H
W
55
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)**
Product Code
Header
Incoming
Uplift
I–Joist (LVL/Solid Flange)
KM–50
4
4
5.16
5.16
**Values obtained from tests carried out by ITW Construction Products Offsite and calculated in accordance with ETAG 015
Values apply to new design only. Please contact Technical Support for further information if required.
The latest most up to date version will always be online and not in print or in downloaded pdf.
79
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker