/
FTHI Flexible Timber Hanger
The FTHI hanger is designed to support joists, trussed rafters and solid timber members in a top fix only application for high load situations. Features & Benefits — Increased top flange to allow for greater load distribution — Options available for skewed, offset, dropped and straddle connections Material Specification — 4mm mild steel with zinc phosphate undercoat with an organic bituminous top coat to BS EN845–1:2013+A1:2016
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
FTHI
FTHIS – SKEW
ANGLE
300
Available Sizes Hanger Widths (mm):
W
75
75
39, 46, 50, 61, 65, 72, 75, 78, 92, 100, 122, 125, 130, 138, 144, 150, 183, 198, 222, 225, 250, 300
H
H
Hanger Depths (mm):
140, 165, 195, 200, 210, 220, 225, 230, 235, 241, 245, 253, 280, 302, 350, 356, 380, 393, 400, 418, 450
150
W
150
FTHI–W–H Example: FTHI–100–245
(skews from 30–87.5º in 2.5º increments, with 5mm automatically added to ordered width to allow for tolerance) FTHIS–W–H–OFFSET DIRECTIONAL–ANGLE Example: FTHIS–100–245–L–45
FTHIO – OFFSET
FTHID – DROPPED
FTHIST – STRADDLE
ST
300
300
75
75
H
H
H
F
150
W
W
W 150
Left hand version shown
150
FTHIO–W–H–OFFSET DIRECTION Example: FTHIO–100–245–L / FTHIO–100–245–R
FTHID–W–H–F Example: FTHID–100–245–220
FTHIST–W–H–ST Example: FTHIST–100–245–140
Load Data
The latest most up to date version will always be online and not in print or in downloaded pdf. Hanger can be used when supported on an open web header given solid blocking is provided in the joist. I–Joist members require backer blocks 12mm diameter holes to top–plate do not require fixings for this application
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)
Product Code
Header
Incoming
Uplift
LVL or GL (Min GL28h)
FTHI/S/O/D/ST
5
2
2.00
42.00
80
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker