/
VS Variable Skewed Timber Hanger
The VS hanger is used to support joists and trusses up to 97mm wide from solid timber members in skewed applications between 30 – 90º.
UKTA–21/0010 UKTA - 21/0010
Features & Benefits — Unique hanger design provides a variable skew angle between 30 – 90º — No need to mitre cut joists — Angle scale on base to ease adjustment
ETA–20/1073
Material Specification — Galvanised mild steel – Z275
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
Right Hand Version shown
2,500
*For use with Paslode PPNXi
Available Sizes
Dimensions (mm)
Min Joist Width (mm)
Hanger Depth (mm)
Max Joist Width (mm)
Handing
195
220
240
300
38 38
97 97
Right
VS–195–R VS–220–R VS–240–R VS–300–R VS–195–L VS–220–L VS–240–L VS–300–L
Left
>97
See FTHIS on page 85
Left Hand
Right Hand
H
245
125
In Situ
— Web stiffeners required for incoming I–Joist — Backer blocks only required for enhanced capacity
— Adequate end blocking required to allow fixings into incoming Open Web Joist
Joist Depth (mm)
Hanger Depth (mm)
Joist Depth (mm)
Hanger Depth (mm)
195/200 220/235 240/245
195 220 240 300
195/202 219/225 253/254
195 220 240 300
300
304
The latest most up to date version will always be online and not in print or in downloaded pdf.
81
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker