/
OW–CLIP Multiple Joist Connector European Community Registered Design
The OW–Clip enables the connection of 2 ply joists allowing them to act as a single unit. Features & Benefits — One part can be used for all joist depths and widths — Flared end for ease of install — Visible connections to verify compliance
UKTA–21/0008 UKTA - 21/0008
ETA–20/0999
Material Specification — Galvanised mild steel – Z275
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
Available Sizes
In Situ
2 ply Open Web Connections
Product Code OW–Clip–47
Flange Depth (F) (mm)
47
Dimensions (mm)
50
67
H
F
50
2 ply I–Joist Connections (Masonite & James Jones I–Joists)
Installation Instructions Stage 1
Stage 2
Stage 3
Stage 4
Lay joist flat and mark location of OW–Clips, press clips into position. Fix clips to the face of the joist using 1No 3.4 x 35mm square twist nail per clip.
Fix clips to the top of the joist using 1No 3.4 x 35mm square twist nail per clip.
Position second ply of multiple joist on top of the OW–Clips and tap together with a hammer to ensure a tight fit.
Fix OW–Clips to top and bottom chords of the multiple joist using 2No 3.4 x 35mm square twist nails per clip, ensuring that joists are fitted tightly together.
The latest most up to date version will always be online and not in print or in downloaded pdf.
92
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker