/
PSTS
Multiple Connections
Layout of Paslode STS 8.0mm In Bottom Chords
Figure 1 – Bottom Chords Depths of 72mm, 84mm or 97mm
II
S
S
S
II
150
Figure 2 – Bottom Chords Depths of 122mm, 147mm, 172mm, 197mm or 222mm Figure 4 – Top Chords/Webs of Depths 122mm, 147mm, 172mm, 197mm or 222mm
45
S
S
S
45
150
Layout of Paslode STS 8.0mm In Webs & Top Chords
II
Figure 3 – Top Chords/Webs of Depths 72mm, 84mm or 97mm
600
II
300
45
Figure 4 – Top Chords/Webs of Depths 122mm, 147mm, 172mm, 197mm or 222mm
600
600
45
300
FASTENERS CAN BE INSTALLED FROM ONE SIDE OF GIRDER TRUSS Except when connecting 4–ply, which must be connected from both sides. For further information please contact Technical Support.
Installation Instructions Stage 1
Stage 2
Stage 3
Stage 4
S
X
X
Install using an impact driver. (One hex driver bit is included in every box)
Bring the underside of the washer head flush with the timber surface.
Always maintain the required minimum edge distance and spacing.
6.5mm Hex Head
8.0mm Hex Head
Select the correct fastener type and size.
Do not countersink or overdrive.
These values vary – please refer to relevant details.
The latest most up to date version will always be online and not in print or in downloaded pdf.
98
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker