Pneumag
At A Glance
Protection: Secondary
Feed Type: Lean / Dilute Phase
Material Type: NdFeB
Cleaning Type: Manual
Our Pneumag high intensity magnetic separator has been designed to operate in lean / dilute conveying lines to provide protection against ferrous and para- magnetic contamination. The unit contains a single double row high intensity magnetic cartridge. It is secured into its housing by quick release toggle clamps, which ensure even pressure is generated around the unique silicon-based metal-detectable seal. The Pneumag can be incorporated into any form of pneumatic conveying line, from lean to dense phase, and can be installed at any angle from vertical to horizontal. A common installation location is at tanker discharge to inspect incoming materials.
Benefits
Materials
• Reduces ‘spark’ risk • Metal detectable seal
• Tamper poof guard
Magnetic Material
Rare Earth Neodymium Iron Boron - (NdFeB)
• Removes sub-micron sized contaminants
Housing
316 grade stainless steel 316 grade stainless steel 316 grade stainless steel
Tubing
Other Parts
Performance
Sealing
Metal detectable silicon rubber – Blue, FDA approved Brushed internally / Polished externally to 1.2μm
Surface Finish
Magnetic Performance 7000, 9000, 10000 (Easy clean), 11000 (Fixed) & 12000 (Fixed) Gauss Performance Reading On tube surface Magnet Grade
Cleaning
N35 & N45 – Inspected and confirmed via hysteresigraph prior to use
The Pneumag uses our 'easy clean' system. To clean, simply release the quick release toggle clamps, remove the contaminated cartridge from the housing and then remove the magnetic cores from the tube assembly. All attracted contamination will be released allowing for inspection or further analysis.
Temperature
-20°C / +60°C
Pressure
+ / -1Bar
Suitability
Options
Suitable Products Suitable Location
Dry powders and granulates
• Pharmaceutical specification
• Stainless steel toggle clamps • Higher pressure units available
All locations
• Safety relay switch
• Higher temperature versions available
32
Eclipse Magnetics Innovative Magnetic Solutions
Made with FlippingBook Digital Proposal Creator