ORO2U ATV Catalogue - ATV Section D - Service and Control Section. Handlebars, Grips, throttles, Control cables, levers, fork seals, Bearing Kits, Gear Levers, Foot pegs, Brake Pedals, Kick Starts.
Section D
Index
A A-Arm Bearing & Seal Kits....................... D126 - D141 A-Arm Bolts ............................................. D156 A-Arm Bushing Kits (Super ATV)............. D104 - D117 A-Arm Bushing Kits (Super ATV)............. D151 - D155 A-Arm Bushing Only Kits - Allballs........... D142 - D149 A-Arm Bushing Only Kits - Bronco........... D150 A-Arms (Super ATV)................................ D86 - D103 Aluminium Axle Bearing Carriers............. D85 ATV Hand Shift Lever............................... D280 B Ball Joint Kits - Allballs............................. D175 - D196 Ball Joint Kits - Bronco............................. D197 - D202 Bar Ends.................................................. D3 Bearing Trade Packs................................ D217 Bearings .................................................. D217 Brake Assemblies - Dia Cast................... D31 Brake Cable Adjuster............................... D54 Brake Cables........................................... D35 - D51 Brake Levers........................................... D21 - D27 C Cable Adaptor.......................................... D54 Cable Adjuster Screw............................... D54 Cable Adjuster Screw - Honda................ D54 Cable Angle Screw................................... D54 Cable Luber V3 - Motion Pro................... D53 Cable Lubricator....................................... D53 Cable Maintenance.................................. D53 Cable Making Kits.................................... D55 Cable Making Materials........................... D54 - D55 Cable Spirowrap (Cable protection)......... D33 Cable Stopper.......................................... D54 Caburettor Caps...................................... D54 Clean Grips - Blackbird........................... D11 Clean Grips - Renthal.............................. D11 Clutch / Brake Lever Assemblies............. D30 - D32 Clutch Cables........................................... D35 - D51 Clutch Ferule............................................ D54 Clutch Lever Assemblies - Dia Cast........ D31 Clutch Lever Assemblies - Forged........... D31 Clutch Levers........................................... D21 - D27 Compression Relase Lever...................... D31 Control Cables......................................... D35 - D55 D Decompressor Kit.................................... D32 Decompressor Lever - Aluminium............ D32 Decompressor Lever - Magura................ D32 Digital Speedometer & Sensor................. D34 Dump Box Shocks................................... D278 - D279 E Easy Clutch ............................................. D33 F Fly Adjuster............................................... D31 Fork & Dust Seal Set............................... D60 G Gear Levers - FIR.................................... D280 - D281 Gear Levers - IMS................................... D280 Gearshift Cables...................................... D52 Grip Donuts - FIR..................................... D11 Grip Donuts - Pro Grip............................. D11 Grip Donuts - Renthal.............................. D11 Grip Glue................................................. D12 Grip Glue - Motion Pro............................. D12 Grip Heaters............................................. D3 Grip Lock - Threebond............................. D12 Grip Lock Spray - Pro Clean.................... D12
G Grip Wire.................................................. D12 Grips........................................................ D4 - D10 Grips - Domino......................................... D10 Grips - FIR............................................... D4 - D5,D9 Grips - Mini Grips..................................... D10 Grips - Motion Pro.................................... D7 Grips - Pro Grip........................................ D4, D8 Grips - Renthal......................................... D5 - D6 Grips - R-tech.......................................... D7 Grips - Scott............................................. D4, D7 H Hand Brake / Throttle Lever Assemblies.. D29 Handlebars............................................... D1 - D2 Handlebars - Elastomer Bar..................... D2 Handlebars - Renthal............................... D2 Handlebars - Steel FIR............................ D1 Handlebars - TPM.................................... D2 Heated Grips............................................ D3 Hydraulic Cable Lubricator....................... D53 I Idle Screw Kit Yamaha Banshee / Blaster...................................................... D54 Inner Cable Wire...................................... D55 Inner Cable Wire Repair Kits................... D55 K Kayaba Shock Tools................................. D56 Kick Starts................................................ D282 King Pin Front Bushing............................ D203 King Pin Sets........................................... D203 KYB Piston Ring Crimp Tool.................... D56 KYB Piston Ring Mounting Tool............... D56 KYB Rear Shock Bleed Cup.................... D56 L Lever Brackets......................................... D27 Lever Covers........................................... D33 Lever Skins Foam.................................... D33 Lever Skins Silicone................................ D33 Levers...................................................... D21 - D27 Levers - Wirtz.......................................... D26 - D27 Linkage Bearing Kits............................... D60 Lower Steering Bearing Kits.................... D218 - D223 M Mid Cable Adjuster................................... D54 N Nipple Barrel............................................ D54 Nipple Mini Sleeve................................... D54 Nipple Round........................................... D54 Nipple Trumpet Shape............................. D54 Nipples..................................................... D55 O Outer Cable Wire..................................... D55 P Psychic Shock Bushing Kits..................... D56 R Rack & Pinion Rebuild Kits...................... D264 - D276 Radius Rods (Super ATV)........................ D118 - D123 Rear Carrier Bearing Kits - Allballs.......... D85 Rear Carrier Bearing Kits - Bronco.......... D85 Rear Carrier Upgrade Kits....................... D85 Rear Independent Suspension Kits......... D158 - D174 Replacement Shock Bushes.................... D214 Reverse Lever - Kawasaki....................... D29 Rubber Cable Boots................................. D55
S Safety Grip Wire...................................... D12 Safety Wire.............................................. D12 Safety Wire Pliers.................................... D12 Shell Needle Bearings............................. D216 Shock Bearing Kits.................................. D58 - D59 Shock Bushing Kits................................. D57 Shock Covers.......................................... D215 Shock Seal Head Kits.............................. D57 Shocks..................................................... D204 - D213 Shocks - Universal................................... D214 Showa Rear Shock Rebuild Kits.............. D56 Solderless Nipples................................... D54 Speedometer Application Chart............... D34 Speedometer Cable - Universal............... D34 Speedometer Heads................................ D34 Steering Bushing & Seal Kit (Yamaha).... D277 Steering Dampers.................................... D3 Steering Rack Boots................................ D263 Steering Racks......................................... D260 - D263 Steering Stem Kit - Pivot Works............... D221 Steering Stem Kits................................... D218 - D219 Suspension Rasing Kits........................... D215 Swingarm Bearing Kits............................ D61 - G62 Swingarm Bolt Kits................................... D63 T Throttle 4 Stroke...................................... D13 Throttle Cable Protection (4 Stroke)........ D55 Throttle Cables......................................... D35 - D51 Throttle Ferule.......................................... D54 Throttle Kits Motion Pro Upgrade Kits..... D19 - D20 Throttle Upgrade Kits............................... D19 - D20 Throttles................................................... D13 - D20 Throttles - Push / Pull.............................. D13 Throttles - Single Pull.............................. D14 - D17 Throttles 2 Stroke.................................... D14 - D17 Throttles Trials......................................... D18 Thumb Throttles....................................... D28 - D29 Thumb Warmer Kits................................. D3 Tie Rod End Kits...................................... D224 - D239 Tie Rod Ends........................................... D248 - D259 Tie Rod Upgrade Kits............................... D240 - D247 Trailing Arms (Super ATV)........................ D124 - D125 Twin Shocks............................................. D214 U Universal Cable Repair Kits..................... D55 Universal Tie Rod Ends........................... D277 W Wheel Bearing & Seal Kits....................... D66 - D85 Wheel Bearings........................................ D64 - D85 Wheel Bearings - Front............................ D64 Wheel Bearings - Rear............................. D65 Workshop DIY Adjuster Kits..................... D55 Workshop DIY Clutch / Brake Kit............. D55 Workshop DIY Nipple Kis......................... D55 Workshop DIY Throttle Kit........................ D55
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
Handlebars
Steel
FIR Steel Handlebars Technology: Tig welded X-bar and CNC precision bends, finished in a super-tough durable epoxy powder. Features: Constructed from thick steel carbon tube for high strength. Plastic end caps prevent bars from cutting through grips. 7/8” (22.2mm). Weight 2-2.6lbs. Made in UK (TAG-Z).
Made in UK
ATV STEEL BARS 6 3/4 ” FIR steel handlebar ATV Utility bend. Rise 6 3/4 ” (175 mm). ATV bars are designed with no crossbar for instruments. Steel bar 2.5mm thick. Hard black powder coated finish. Based on Honda TRX250/TRX300 bend. Colour; Black Honda TRX300 Bar 16-289
16-289
ATV STEEL BARS 7 1/4 ” FIR steel handlebar ATV Utility bend. Rise 7 1/4” (185mm). ATV bars designed with no crossbar for instruments. Steel bar 2.5mm think. Hard black powder coated finish. Based on Yamaha YFM350/450 bend. Colour; Black Yamaha YFM Bar 16-288
16-288
ATV STEEL BARS 9 1/2 ” FIR steel handlebar ATV Utility bend. High rise 9 1/2” (245mm). ATV bar designed with no crossbar for instruments. Steel bar 2.5mm thick. Hard black powder coated finish. Based on Honda TRX400/TRX420EX bend. Colour; Black Honda TRX420 Bar 16-2800
16-2800
ATV STEEL BARS 5 1/2 ” FIR steel handlebar ATV Utility bend. Rise 5 1/2 ” (140mm). ATV bars designed for rigidity. Steel bar 2.5mm thick. Hard black powder coated finish. Based on Suzuki Quad Sport LT’s bend. Colour; Black ATV Sports / Race Bar 16-300 ATV STEEL BARS 6” FIR ATV universal steel bar. High rise 6” (155mm). ATV bars designed for rigidity. Steel bar 2.5mm thick. Hard black powder coated finish. Based on Yamaha YFZ450R Bend. Colour; Black ATV Sports / Race Bar 16-291
16-300
16-291
ATV STEEL BARS 7“ FIR steel handlebar ATV Utility bend. High Rise 7” (175mm). ATV bars designed crossbar for rigidity. Seel bar 2.5mm thick. Hard black powder coated finish. Based on Kawasaki KXF’s Bend. Colour; Black ATV Sports / Race Bar 16-302
16-302
Optional Builds: 2mm / 2.5mm / 3.0mm thick steel Optional Features: Huge variety of bends (MX, Mini MX, Dirt, Road/Street and ATV bends). Available in 7/8” (22.2mm) and 1” (25.4mm). Optional Finish: Super-tough epoxy powder coated. Deep chrome plate. Range of colours; Black, Blue, Red, Orange, Green, Chrome. Available with or without crossbar pad.
FIR ATV HANDLEBAR DIMENSIONS Bend Part No.
A B C D E 775 175 105 145 95
F
Honda TRX300
16-289
235
Yamaha YFM
16-288
800 185 140 150 110 195
Honda TRX420
16-2800 770 245 185 150 85
240
ATV Sports/Race
16-300
775 140 115 130 80
190
ATV Sports/Race
16-291
775 155 105 145 60
215
ATV Sports/Race
16-302
720 175 110 135 80
190
*Note: Size in mm (+/- 3mm)
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D1
Handlebars
Alloy
RENTHAL ATV FAT BARS The Renthal Fatbar is a large diameter 1 1/8” (28.6mm) brace-less handlebar that combines excellent strength with good resilience. The bar has a 5mm wall for extra strength, shot-peened anodized corrosion-resistant finish on exterior tube, and knurled bar end to prevent grip movement. All Fatbars have a laser etched positioning grid.
* Please note bar pad is not included
48-215
Renthal ATV Fatbar Dimensions Bend Part No.
A B C D E
F
ATV High
48-215
795 95
70
115 62
200
Kawasaki KFX450R
48-219
769 96
64
120 72
195
Yamaha YFZ450 07-12
48-221
784 105 70
140 86
210
*Note: Size in mm (+/- 3mm)
RENTHAL 7/8” ATV HANDLEBARS Made from a special aluminium alloy exclusively for Renthal Motorcycle and ATV handlebars. This alloy offers incredible strength, reduces vibration, and has the perfect amount of flex that cushions the rider from sharp impacts.
Renthal 7/8” ATV Handlebar Dimensions Bend Part No.
A B C D E
ATV Race
48-781
806 150 95
205 75
200X ATC
48-652
790 128 93
225 90
Honda TRX250R FourTrax
48-615
770 160 120 200 98
Honda TRX400EX 99-09
48-787
790 142 105 200 90
Honda TRX450R 04-07
48-787
790 142 105 200 90
Suzuki Quad Racer / Special Quad
48-677
770 120 115 180 92
Suzuki LTZ400 03-07
48-787
790 142 105 200 90
48-781
* Please note bar pad is not included
Suzuki LTR450 06-09
48-815
804 89
79
100 82
Yamaha YFZ350 Banshee
48-636
775 150 120 190 100
Yamaha YFZ450 04-05
48-794
773 110 87
175 97
Yamaha YFZ450 06-08
48-810
780 106 69
110 88
Yamaha YFM660 Raptor 01-05
48-607
785 140 105 155 100
TPM ATV HANDLEBARS TPM ATV Handlebars. Cold forged in aluminium. This handlebar is the best mix for strength and comfort. Available in four colours; Blue, Red, Silver, Titanium. *Please not that these bars are not Genuine sized, they are just an alternative * Renthal ATV Fatbar Dimensions Bend Part No. A B C D E YFS200 Blaster 16-201 720 135 - - 70 YFM350 Warrior 16-201 720 135 - - 70 YFM350 Banshee 16-201 720 135 - - 70 YZF450 16-201 720 135 - - 70 YFM660 Raptor 16-200 735 100 - - 60 Bombardier 650 16-200 798 142 - - 96 KSF250 16-201 720 135 - - 70 KXF700 16-200 798 142 - - 96 Honda FourTrax 16-200 798 142 - - 96 LTZ/LTF250 16-201 720 135 - - 70 LTZ/LTF400 16-200 798 142 - - 96 *Note: Size in mm (+/- 3mm)
Yamaha YFM700 Raptor 06-09 *Note: Size in mm (+/- 3mm)
48-811
790 141 112 125 90
48-781
ATV ELASTOMER BAR 28.6 Quad sport Elastomar Handlebars. Colour Black.
16-250
Constructed from CNC machined billet 6061 aluminium with elastomers fitted in cross brace to absorb impacts and eliminate most other forms of vibration. ATV/ MX Bar 16-250
*Please visit our website for current prices
D2
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
Handlebars
Accessories
GRIP HEATERS Keep your hands warm! A self adhesive heat pad that sticks to each side of the handlebar and then you slip the grip of your choice over the pad. Includes switch with Hi, Lo & Off control. Grip Heaters 44-100.PR Trade Pack Of 6 44-100_PK/6
44-100.PR
THUMB WARMER KIT Protect your thumbs from freezing. Easy to install, uses only 4 watts of electricity. Specification: W/ 1 pc switch, 1 pc rubber boot, 1 pc tape, w/ instruction sheet. Thumb Warmer Kit 44-103
44-103
STREET STYLE GRIP HEATERS Grip heaters with road style grips. Comes complete with wires, connectors etc. Adjustable heat switch: 26, 40, 65 & 90 0 C included in the set. Will fit all 7/8” handlebars. 12A/35W, 12.6V. Street Style Grip Heaters 12-004
ATV HEATED / HOT GRIPS KIT Keep your hands warm! Heat pad is built into the grips. Fits all 7/8” handlebars. Both grips have 7/8” fittings and are 130mm in length. Comes complete with wires and Hi-Low-Off toggle switch. Heated / Hot Grips Kit 44-101.BR Switch Only 44-101.SW
12-004
44-101
FIR BILLET CNC BAR ENDS FIR T6 Aluminium Billet Bar Ends.
CNC machined. Most alloy bars are 14mm, and Pro Taper type bars are 12mm. Helps reduce the vibration through the bars and stop the bars from punching a hole through
your grips if dropped. Sold in pairs. Available in 2 sizes; 14 and 18mm. Only available in Silver. Alloy Ultima Biller CNC Bar Ends Description
Size
Part No.
Fits most Aluminium Bars
14mm 12-0114 18mm 12-0118
Fits Steel Bars
UNIVERSAL STEERING DAMPER (FIR) • Steering damper with reservoir - adjustable • Overall length 370mm • Maximum adjustable length 330mm from eye to eye of rose joints, body length 200mm Helps keep the bike tracking straight over difficult terrain such as ruts, rocks and sand, and also smooths out jolts through the handlebars at the end of jumps. They also reduce arm fatigue on longer rides by reducing the amount of effort needed to control the handlebars. FIR Universal Steering Damper (Black) 29-5981 FIR Universal Adjustable Steering Damper Universal adjustable 6 step steering damper. Overall length 370mm, Maximum adjustable length 330mm from eye to eye of rose joints, body length 200mm. Helps keep the bike tracking straight over difficult terrain such as ruts, rocks and sand, and also smooths out jolts through the handlebars at the end of jumps. they also reduce arm fatigue on longer rides by reducing the amount of effort needed to control the handlebars. Available in 3 colours: Black, Gold or Silver. FIR Universal Steering Damper 29-599
29-5981
29-599
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D3
Grips
* All ATV grips are 22/22mm unless stated *
Scott Radial ATV Grips
Scott Deuce ATV Grips
• This is the latest Scott ATV grip • Designed fro the serious competitor of the weekend rider • Space=age soft TPR compound • Minimum diameter for gripping power • Grooving for wire-ties • For use with all ATV’s, PWC’s and snowmobiles without a twist throttle Part No. 22-593.BK
• ATV double density grip • Double density or DoubleD grips combine two densities of the highest quality materials to create durable performance grips • Half waffle • Medium density waffle pattern • Maximum comfort and durability • Soft density palm area reduces vibration, arm pump and fatigue • Features an integrated safety wire channel and includes grip donuts • Available in 4 dual colour schemes; Black/Green, Black/Grey, Blue/Grey, White/Grey Part No. 22-598
Scott SX II ATV Grips
Pro Taper
• SX II double density grip • Double density or DoubleD grips combine two densities of the highest quality materials to cre- ate durable performance grips • Full diamond design • Firm density compound is used on the inner core and end cap for maximum durability • Soft density diamond pattern reduces vibration, arm pump and fatigue • Features integrated safety wire channel • Includes grip donuts • Available in 3 dual colour schemes; Black/Grey, Blue/Silver, Red/Grey Part No. 22-600
• Pro Taper’s most popular grip in the off-road world • The pillow top pattern reduces vibration and cushions impact • Inner core compound perfects the bonding interface with bars • Anti-rip tip uses danser compound to increase life of the grip • Designed to self clean and shed mud away from outer surface • Available in 2 different colour schemes. Part No. 12-602 (Small Flange) 12-603 (Large Flange)
ProGrip 999 Grips
ProGrip 727 Gel Grips • Designed specifically for ATV handlebars • Firm on the inside ‘Gel’ on the outside • Ideal choice for all-round ATV and Quad riding • Full waffle with gel areas around the grip Part No. 12-727.BK.PG727
• New ProGrip 999 ATV Grips • Special rubber grip with a high weather resist- ance • Features a unique locking system • 100% locked onto bar • 100% non-slip Part No. 12-728.BK.PG999
FIR Dual Compound Gel Grips • FIR dual compound gel grips • The outer (finger grip) layer of the grip is con - structed from a soft compound rubber and the inner layer and outer edges are constructed from a firmer compound • Available in 3 colour schemes; Black/Blue, Black/Grey, Black/Black * Please Note; These grips are 22/25mm, only for use on ATV’s with a throttle conversion * Part No. 12-389 12-389_PK10
FIR ATV Grips
• Oury ATV grips • Designed specially to fit ATV handle bars • Soft rubber compound • Large pad and wide groove design offers maxi - mum grip and comfort • Anti-vibration, large pad design eliminates slip- page and reduces hand fatigue • Available in 3 colours; Black, Blue, Red Part No. 12-355 12-355_PK10
*Please visit our website for current prices
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
D4
Grips
* All ATV grips are 22/22mm unless stated *
FIR Dual Compound Grips
FIR ATV Dual Compound Grips
• ATV Dual compound gel grips • Outer finger grips is a soft compound • Inner layer and outer edges are a firm compound • Only available in black Part No. 12-388.BK
• ATV 50/50 dual compound grips • Out layer of the grip around the flange and inner area of the grip is constructed from a firm compound • The inner and outer end of the grip is constructed from a soft compound • Available in 2 colour schemes; Black/Blue, Black/ Grey Part No. 12-398
Renthal Single Compound ATV Grips Renthal single compound grips are available in different patterns. Each pattern is available in 3 advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style.
Style
Part No 48-023 48-020 48-024
Compound
Soft Compound Grips Soft Compound Grips Medium Compound Grips Medium Compound Grips Firm Compound Grips Firm Compound Grips
50/50 Soft
Full Diamond Soft
50/50 Medium
Full Diamond Medium 48-021
50/50 Firm
48-025 48-022
Full Diamond Firm
Single Compound Full Diamond
Single Compound 50/50
Renthal Dual Compound ATV Grips Renthal Dual layer grips combine the durability of Renthal firm compound grips with the feel and absorption qualities of the Renthal range of softer compound grips. Firm compound is used for the flange, inner sleeve and outer-end of the grip for maximum durability, whereas softer compounds are used for out diameter of the grip, which is in direct contact with the palm, fingers and thumb. Available in 3 different colours; Black/Grey, Blue/Grey, Red/Grey
Black/Grey 50/50 Grips 48-026.G168 Blue/Grey 50/50 Grips 48-027.G170 Red/Grey 50/50 Grips 48-028.G169
Dual Compound
Renthal Kevlar Dual Compound ATV Grips Renthal has developed a special reinforced grip made with increased wear resistance. The grip has all the properties you would expect from a Renthal grip but with the life extending properties of Kevlar® brand resin. The base material contains millions of randomly aligned Kevlar® brand resin particles. As the grip is used more particles are exposed, so the number of particles at the grip surface increases. The result is revolutionary with the softest material we have ever produced which lasts three times longer than our current soft material.
Kevlar® Dual Layer 50/50 48-029.G171
Kevlar Dual Compound
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D5
Grips
* Please note; All grips on this page are 22/25mm * * Can only be used on ATVs with a throttle conversion *
Renthal Kevlar Dual Series Grips Aramid Compound
Featuring the most advanced grip compound to date. Millions of randomly aligned Kevlar® brand resin particles are suspended in the base material. As the grip is used, more of these particles are exposed, resisting wear whilst retaining a tacky feel. This is Renthal’s ultimate grip compound! Kevlar Grips Kevlar Tapered Grips 48-018.G166 Kevlar 50/50 48-019.G165 Renthal Ultra Tacky™ Dual Series Grips Ultra Tacky™ The unique properties of the Ultra Tacky™ compound provide a stronger bond to the handlebar, meaning you are able to control the bike with less physical input. The sticky surface lasts the lifetime of the grip. If it loses stickiness, simply wash with clean water and air dry to re-activate. Ultra Tacky™ Grips Ultra Tacky 50/50 Grips 48-014.G197
Kevlar Dual Series
Ultra Tacky™ Dual Series
Renthal Dual Series Grips Dual Compound With a hard wearing base material and soft compound you get the best of both worlds. The baseensures the grip survives the toughest of punishments whilst the contact patch provides comfort and feel of a soft grip. The Dual Compound Grip is available in 3 different styles: 50/50, Full Waffle & Taper.
Dual Compound Series
Taper
50/50 & Full Waffle
50/50 Grip Grey/Black 48-045.G151 50/50 Grip Grey/Blue 48-015.G157 50/50 Grip Grey/Green 48-049.G191 50/50 Grip Grey/Red 48-016.G156 50/50 Grip Grey/Orange 48-017.G155 50/50 Grip Grey/Yellow 48-050.G192
Taper Grey/Black
48-043.G154 48-013.G162 48-051.G193 48-012.G164 48-011.G163 48-052.G194
Taper Blue Taper Green Taper Orange
Taper Red
Taper Yellow
Full Waffle Grey/Black
48-044.G152
Renthal Trials Grips Renthal trials grips have been an industry standard and have been used by more world champions than any other grip on the market. Available in three advanced rubber compounds, soft, medium and firm, the trials grips feature a smaller inner flange and an all diamond pattern for the greatest amount of tackiness, shock absorption and feel. Trials Grips Soft Compound 48-046.G095 Medium Compound 48-047.G096 Hard Compound 48-048.G097 Renthal Original Series Grips Original Series Grip Tech takes Renthal’s championship winning single shot design and provides riders with a vast number of options. With 3 compounds and 3 patterns to choose from there’s a grip for anyone amongst the Original Series range. The 3 compounds available are; Soft Compound - Light Grey, Medium Compound - Mid Grey, and Firm Compound - Dark Grey. Each of the 3 compounds is available in 3 different motocross or enduro styles, offering a choice of 9 different grips. The 3 styles available are; Full Diamond , Full Waffle and 50% Diamond with 50% Waffle . Part number as grid below. Soft Compound Medium Compound Firm Compound Full Diamond 48-035.G089 Full Diamond 48-036.G090 Full Diamond 48-037.G091 Full Waffle 48-030.G092 Full Waffle 48-031.G093 Full Waffle 48-032.G094 50/50 48-040.G086 50/50 48-041.G087 50/50 48-042.G088
Original Series
Trials
Renthal Grip Glue Recommended for use on Renthal Grips, or any other type of standard grip where adhesive is required. Renthal Grip Glue 25ml 48-101.REN Renthal Quick Bond Grip Glue A highly developed grip glue, specially formulated to give a secure bond without damaging the grip. Renthal quick bond grip glue is a fast acting liquid adhesive, chemically engineered to bond in just 3 minutes. Renthal Quick Bond Grip Glue 25ml 48-102
48-101.REN
48-102
*Please visit our website for current prices
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
D6
Grips
* Please note; All grips on this page are 22/25mm * * Can only be used on ATVs with a throttle conversion *
Radial Half Waffle Grips The SCOTT Radial grip is a single density half waffle grip. A half waffle pattern on one side and a low profile pattern on the other offers great grip and comfort. This traditional grip is a top choice amongst many top racers and weekend warriors alike.
Radial Full Waffle Grips The SCOTT Radial Full Waffle grip is based on the Hurricane Full waffle grip which was the standard by which most grips are based. Radial Full Waffle grip features a tried and true design that has been around for decades. Featuring a full waffle design, the Radial grip offers a dependable feel many top racers have come to expect. • Single density grip. • Traditional full waffle design. • Integrated safety wire channel. • Colours; Blue, Black, Grey, Orange or Red. Part No. 22-592
• Single density grip. • Half waffle pattern. • Soft palm area.
• Integrated safety wire channel. • Colours; Black, Grey or Orange. Part No. 22-591
Deuce Grips The SCOTT Deuce Grip is a half-waffle, dual compound grip designed to offer maximum grip and comfort. With a medium density raised waffle pattern and a soft density palm area, this grip fights vibration, arm pump and fatigue. • Double density grip. • Half waffle pattern. • Soft density palm area. • Integrated safety wire channel. • Grip donuts included. • Colours: Blue/Grey, Black/Green, Black/Grey, Red/Grey and White/Grey. Part No. 22-597
SX II Grips The SCOTT SXll grip is a dual density grip with a soft density diamond pattern surrounding a firm density core and end cap. The raised diamond texture offers incredible grip while the soft compound helps reduce arm and hand fatigue. Included Neoprene grip donuts help reduce abrasion and thumb blisters. This grip is a top choice amongst many top racers and weekend warriors alike.
• Double density grip. • Full diamond design. • Integrated safety wire channel.
• Colours: Blue/Blue, Blue/Clear, Green/Black, Grey/Black, Orange/Black, Yellow/Black, Red/Black, White/Blue, & White/Grey. Part No. 22-599
Rtech Wave Slim Grips Newest generation of grips made from a special heat-sensitive material, designed to satisfy the exact shape of the hand. • Extra slim thickness for a better grip.
Wirtz Dual Density MX Grips Wirtz MX grips 22/25mm. A unique Dual density design incorporates the soft compound strategically placed at the palm of our medium compound grip to reduce blistering hand fatigue. Design integrated grooves accept wire ties for improved retention.
• Ergonomically designed to reduce hand and arm fatigue. • End plate reinforced to prevent tearing during a fall. • Super soft to ensure comfort and grip like never before. • Colours: Blue, Black, Green, Grey, Orange, Red & Yellow. Part No. 12-390
• Dual density grip. • Half waffle pattern. • Soft density palm area. • Integrated safety wire channel. • Colours: Green, Red, White or Yellow. Part No. 12-357
Motion Pro Road Control TM Grips
Motion Pro Dirt Control TM Grips
• Ergonomic design. • Medium density TPR compound provides excellent feedback and control without sacrificing durability. • Full diamond pattern for an unparalleled feel in both wet and dry conditions. • Inner diameter optimised to keep grips se- in any conditions. • Fits 7/8 bars and throttle sleeves. • Open end allows easy installation of bar weights. • Colours: Black. Part No. 12-410
• Ergonomic design. • Medium density compound provides excellent comfort and control without sacrificing durability.
• Available in a self cleaning half-waffle or full waffle pattern for a secure feel in both wet and dry conditions. • Deep safety wire grooves provide ample space for wire placement so comfort is not compromised. • Inner diameter optimized to help keep grips secure in any conditions. • Fits 7/8 bars and throttle sleeves. • Colours: Black or Grey. 50/50 Grips 12-400 Full Waffle 12-405
cure
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D7
* Please note; All grips on this page are 22/25mm * * Can only be used on ATVs with a throttle conversion *
Grips
791 Duo Density • These 791 Progrip MX grips are constructed from two different density rubber materials. • Hard material in the inner part of the grip to fix better on the bar without any problem of slipping. • Soft material on the outer part, for reduction of all vibrations that the motorcycle can transmit. • Comfort and technology for your hands. • Length 115mm. • Colours: Black/Blue, Blue/Yellow, Black/Green, Black/Grey, Black/Orange, Black/Red, Black/ White & Black/Yellow. • Made in Italy. Part No. 12-700 798 Dual Density • These 798 Progrip MX grips are constructed from two different density rubber materials. • Hard material in the inner part of the grip to fix better on the bar without any problem of slipping. • Soft material on the outer part, for reduction of all vibrations that the motorcycle can transmit. • Comfort and technology for your hands. • Extra large donut ends and wiring grooves. • Length 115mm. • Colours: Black/Blue, Black/Green, Black/Orange, Black/Red, Black/Silver & Black/Yellow. • Made in Italy. Part No. 12-397
794 MX Single Density
• Progrip single density grips. • Soft to the touch yet hardwearing. • These 794 MX grips are made with a gont single density rubber material. • Comfort and technology for your hands. • Length 115mm. • Colours: Blue, Black, Green, Grey, Orange, Purple, Red & Yellow. • Made in Italy Part No. 12-396
799 MX Dual Density
• These 799 Progrip MX grips are constructed from two different density rubber materials. • Hard material in the inner part of the grip to fix better on the bar without any problem of slipping. • Soft material on the outer part, for reduction of all vibrations that the motorcycle can transmit. • Comfort and technology for your hands. • Length 118mm. • Colours: Black/Orange Dot • Made in Italy Part No. 12-399.BK
838 Trials X-Slim
Magura Full Waffle MX Grips
• These 838 trials grips are constructed from two different density rubber materials. • Hard material in the inner part of the grip to fix better on the bar without any problem of slipping. • Soft material on the outer part, for reduction of all vibrations that the motorcycle can transmit. • Comfort and technology for your hands. • Length 122mm. • Colours: Black/Red. • Made in Italy. Part No. 12-729
Replacement genuine Magura grips. • Full Waffle Design. • Integrated safety wire channel.
• Length 125mm. • Colours: Black • Made in Italy. Part No. 12-394
MX Dual Compound
Foam Grips
• Dual compound grips are constructed from two different density rubber materials. • Outer layer of the grip around the flange and inner area of the grip is constructed of a firm compound rubber. • Inner and outer end of the grip is constructed from a softer compound. • Colours: Black/Blue or Black/Grey. Part No. 12-356
Foam offers you the most comfortable grip available. When you grip them, it moulds to the shape of your hand to give maximum grip. • Comfortable Design. • NOT recommended for Motocross. • Colours: Black, Blue & Red. Part No. 12-392
*Please visit our website for current prices
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
D8
* Please note; All grips on this page are 22/25mm * * Can only be used on ATVs with a throttle conversion *
Grips
MX Pillow Top ProTaper’s most popular grip in the off-road world. The Pillow Top grip drastically reduces vibration and improves your ride. • Vibrasonix pillow top eliminates vibration and cushions impact. • Tacky gel-like surface compound is perfect for off-road riders. • Inner core compound perfects the bonding inter- face with bars. • ANTI-Rip Tip uses denser compound to increase life of the grip. • Designed to self-clean and shed mud away from outer surface. • Colours: Grey/Blue, Grey/Green, Grey/Black, Grey/Orange, Grey/Red & Grey/Yellow. Part No. 12-601
MX Pillow Top Lite
The evolution of our most popular grip, the Pillow Top. The Pillow Top Lite was constructed with the same vibration reducing elements, but with a smaller overall diameter. • Lower profile for better overall hand control. • Reduces vibration and cushions impact. • Tacky gel-like surface compound is perfect for MX & off-road riders. • Inner core compound perfects the bonding interface with bars. • ANTI-Rip Tip uses denser compound to increase life of the grip. • Designed to self-clean and shed mud away from outer surface. • Colours: Black/Blue, Black/Black, Black/Green, Black/Orange, Black/Red & Black/Yellow. Part No. 12-605 MX Single Density Half Waffle The Single Density grip is ProTaper’s bread & butter when it comes to their grip line. On offer is a wide variety of compounds and patterns to suit every rider’s style and preference. • Custom Kraton rubber compound provides long wear and tear resistance. • Half waffle pattern offers great traction and vibration dampening. • Available in soft and medium compounds. Part No. 12-607
MX Single Density Full Waffle The Single Density grip is ProTaper’s bread & butter when it comes to their grip line. On offer is a wide variety of compounds and patterns to suit every rider’s style and preference. • Custom Kraton rubber compound provides long wear and tear resistance. • Full waffle pattern offers great traction and full waffle pattern minimizes vibration. • Available in soft and medium compounds. Part No. 12-606
MX Dual Density Full Diamond The Dual Density Pro Taper grips give the rider a tacky feel, but also incorporate a more firm compound to ensure the grip holds up over time. • Constructed of both firm and soft Kraton rubber compounds. • Outer casing provides long lasting wear against tearing. • Inner casing provides excellent tackiness and shock absorption. • Improved Inner Core, which helps the hand grip, grip the bar like a vice. • Full diamond pattern maximises grip and reduces vibration. Part No. 12-600
FIR MX Single Compound Super Saver. For all off road motocross and enduro type applications. Honda CR type pattern. Featuring a full waffle design, this grip offers a dependable feel many racers/fun riders have come to expect. • Single compound grip. • Traditional full waffle design. • Integrated safety wire channel. • Colours; Blue, Black, Green, Grey, Orange, Red or Yellow (Yellow is 50/50 grip). Part No. 12-395 Trade Pack Of 10 Grips Mixed 12-395_PK10
FIR Comp 3 Dual Gel Layer
FIR Dual Layer
• Firm Compound Grip set, with maximum durabil- ity. • Has a sticky feel and a direct feel to the palm of your hand. • Off road and trial grip designed for hard use but to still give a nice feel. • Length 115mm. • Colours: Black/Blue, Black/Grey & Black/Red. Part No. 12-351
• FIR Dual layer grips are constructed from two dif- ferent density rubber materials. • Firm compound used for the flange, inner sleeve and outer end of the grip. • Soft compound used for the outer layer of the grip, which is in direct contact with the palm and fingers. • Integrated safety wire channels. • Colours: Black/Grey. Part No. 12-353
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D9
* Please note; All grips on this page are 22/25mm * * Can only be used on ATVs with a throttle conversion *
Grips
Domino Dually
Domino Diamante
• Features a unique two colour, dual compound system. • Dual compound combines firm and soft materials for comfort, grip and durability. • Diamond dimple pattern is easy on the palm, while the 1/2 waffle pattern provides solid grip. • Specifically designed for Motocross and Enduro riders. • Fit 7/8” handlebars or 1-1/8” bars that taper to 7/8” at control area. • Integrated safety wire channel. • Colours: Black/Grey, Black/Red, Black/Yellow or Grey/Orange. • Made in Italy. Part No. 12-4200
• Features a unique two colour, dual compound system. • Dual compound combines firm and soft materials for comfort, grip and durability. • Aggressive, diamond dimple pattern provides cushion, palm comfort and solid grip. • Specifically designed for Motocross and Enduro riders. • Fit 7/8” handlebars or 1-1/8” bars that taper to 7/8” at control area. • Colours: Black/Grey, Black/Orange, Black/Red, Blue/White or Grey/Orange. • Made in Italy. Part No. 12-4201
Domino Victor Half Waffle
Domino Trials The Domino Bi-Polymer Trials grips are soft on the outside but feature a tough inner core that resists twisting on the bars. • Dual compound design to provide strength and comfort. • Moulded bar end to prevent damage. • Universal fit.
• Proprietary, medium-soft compound satisfies the widest range of rider preferences. • Compound is easy on the palm, while the half waffle pattern provides maximum grip. • Fit 7/8” handlebars or 1-1/8” bars that taper to 7/8” at control area. • Integrated safety wire channel. • Colours: Black. • Made in Italy. Part No. 12-4202
• Integrated safety wire channel. • Colours: Black/Red & Grey/Black. • Made in Italy. Part No. 12-4205
Domino MotoGP
Domino XM2 Street Designed specifically for sport touring. The XM2 grip is inspired by the Domino dual compound MotoGP grip. While the MotoGP is designed purely for road race competition, the XM2 utilizes an even softer outer compound for long range comfort. • Dual-compound design with firm inner and softer outer compound for progressive feedback without a spongy feel. • Measures 126mm wide with open ends. • Fits 7/8” bars. • Colours: Black/Grey or Black/Red. • Made in Italy. Part No. 12-4204
Designed exclusively for road race competition, proven by the fastest MotoGP teams. • Dual-compound design with firm inner and softer outer compound for progressive feedback without a spongy feel. • Measures 126mm wide with open ends. • Fits 7/8” bars. • Colours: Black/Grey or Grey/Black. • Made in Italy. Part No. 12-4203
Domino / Tommaselli Trials
Replica Domino / Tommaselli trials grips. • Soft compound rubber gives durability and the feel you need for trials riding. • Colours: Black. Part No. 12-391
Original 3/4” Minigrips
This is the grip that got it all started. The “Original” Minigrips. Tried and true, full waffle, medium compound grips specifically designed for your Honda CRF and XR50’s, your Yamaha TTR and PW50’s, and your Suzuki DRZ70’s. • Full waffle pattern. • Colours: Black/Red & Grey/Black. Part No. 12-360
FIR Mini ATV Grips
• Kids 50/90cc mini ATV Grips • Waffle Style • Universal fitting for standard bars / throttle (19mm / 3/4”) Part No. 12-3934.BK.FIR
*Please visit our website for current prices
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
D10
Grip Accessories
Renthal Grip Donuts These Renthal Grip Donuts not only make your bike look “Factory” they will help save the inside of your hands from blisters late into a moto-x allowing you to charge to the last lap. Available in 3 colours Red, Blue and Grey. Renthal Donuts 13-123
ProTaper Blister Busters (Grip Donuts) ProTaper Blister Busters. Helps prevent blisters from forming on the thumb. Constructed from soft, comfortable Neoprene. ProTaper Blister Busters 13-121.PRO
Pro Grip Donuts Pro Grip Anti-Blister foam donuts. Give your knuckles a break, add a pair of these thermo formed foam pads to any pair of off road grips for an extra layer of protection. Available in 6 colours: Blue, Black, Green, Orange, Red and Silver. Sold in pairs. Pro Grip Donuts 13-119
Psychic Grip Donuts (Blister Beaters) Psychic grip donuts. Helps prevent blisters from forming on the thumb. Constructed from soft, comfortable Neoprene. Available in 6 different designs: Blue / Yamaha logo, Black / Skull images, Green / Kawasaki logo, Orange /KTM logo, Red / Honda logo and Yellow / Suzuki. Blue Yamaha Donuts 13-130.BE Black Skull Donuts 13-130.BK Green Kawsaki Donuts 13-130.GN Orange KTM Donuts 13-130.OR Red Honda Donuts 13-130.RR Yellow Suzuki Donuts 13-130.YE Trade Pack Of 10 13-130_PK10
13-118.BK
13-118.MON
Grip Donuts Super Soft Grip Donuts. Give your knuckles a break, add a pair of these to any pair of off road grips for an extra layer of protection. Available in 2 designs: Super Soft of Monster Energy. Sold in pairs. Super Soft Donuts 13-118.BK Monster Energy Donuts 13-118.MON
48-010.PRO
48-010.BB
48-010.HRC
48-010.RT
Clean Grips Keeps your grips clean while your mechanic works on the bike. Velcro fastened, manufactured from lightweight synthetic fabric. Power-wash proof permanent graphics. Used by top factory teams. Blackbird Racing Clean Grips 48-010.BB Blackbird HRC Clean Grips 48-010.HRC ProTaper Clean Grips 48-010.PRO RaceTech Clean Grips 48-010.RT
Renthal Clean Grips Keeps your grips clean while your mechanic works on the bike. Velcro fastened, manufactured from lightweight synthetic fabric. Power-wash proof permanent graphics. Used by top factory teams. Renthal Clean Grips 48-010.REN
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D11
Grip Accessories
Safety Wire Kit An ideal starter kit for wiring bolts, drain plugs, grips etc. to eliminate loosening. An easy to use tool, together with 30 Mt. of safety wire. Safety Wire Kit. 00-460 Trade Pack of 10 00-460.PK/10
00-460
Safety Wire Pliers For a professional finish when wiring grips, bolts & screws. A powerful set of pliers with a locking mechanism, which grips the wire, with a built in spinner to evenly coil the wire. Locking Pliers 00-370 Trade pack of 5 00-370.PK5
00-370
Grip Wire Stainless steel wire for securely fastening on handle bar grips, or wiring bolts, etc. Very important with the power output of today’s bikes. Wire is 0.8mm thick. Grip Wire 30 metres 00-395 Trade Pack of 10 00-395.PK/10 450g Workshop Roll 00-395_450g
00-395
00-395_450g
MP Grip Glue & Multi Purpose Adhesive This versatile adhesive bonds quickly and securely to a wide variety of materials in a broad range of temperatures, but not so fast you can’t get your grips on in time, a problem with a lot of other adhesives used for grips. Motion Pro grip glue remains flexible after it cures, it’s waterproof, and is easily removable when it comes time to change grips. This glue is also an excellent general purpose adhesive applicable to a number of other uses. MP Grip Glue & Adhesive 01-201
01-201
Grip Glue 36g Tube The biggest tube of grip glue we stock! 36g tube, ideal for use on all types of grip. Grip Glue 36g 01-200 Griplock Pack of 10 01-200.PK/10
Pro*Clean Grip Lock Spray Grip Lock is the easiest way to fit your grips EVER. Ditch the mess of super glue, and the spray paint, Grip Lock is affordable, and really works! Pro*Clean Grip Lock 70ml 72-203
01-200
72-203
Three Bond Grip Lock Specifically formulated to vulcanize rubber grips to the handlebar. 28.35g (1oz). Griplock 01-102
01-102
*Please visit our website for current prices
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
D12
Throttles
4 Stroke Push / Pull
Honda CRF Throttle 4-Stroke Throttle to fit the Honda CRF250/450’s 2002-15. Push pull throttle. OEM Replica. • Aluminium throttle housing. • Injection moulded throttle tube. • Push Pull throttle.
KTM SX-F/XC-F Throttle KTM SX-F/XC-F 250/450/530 4-Stroke push/pull throttle. • Aluminium throttle housing. • Injection moulded throttle tube.
• Push Pull throttle. • 90 0 turn throttle. • Quick action. Part No.
Honda CRF Throttle Assembly
12-040.EA
12-041.DR
Pack Of 10 Throttles
12-040.PK10
Straight Push/Pull Throttle Similar to throttle used on Yamaha YZ/ WR400,FZR, YZF and XT dual-sport bikes. Special cables available to fit most applications requiring quick turn ratios. • Die-cast aluminium housing with black epoxy finish. • Injection moulded throttle tube. • Push Pull throttle.
Push/Pull Throttle Opens carburettors up to 38mm. Perfect for smooth-bore conversions on street and race bikes. Special cables available to fit most conversions. • Die cast aluminium housing with Black epoxy finish or Chrome finish. • Injection moulded throttle tube. • Push Pull throttle.
Motion Pro Throttle Assembly (Black) FIR Throttle Assembly (Black) FIR Throttle Assembly (Chrome)
12-076.BK 12-059.BK 12-059.CH
FIR Push/Pull Throttle Assembly
12-073.DR
Pack Of 10 Throttles
12-073.DR.PK10
Motion Pro Push/Pull Throttle Assembly 12-073.MP Replacement Throttle Tube 12-210.TWIN
Replacement Sleeve Universal Cable Pull Universal Cable Push
12-206
14-709.A 14-709.B
Universal Push/Pull Throttle Universal 4-Stroke push/pull throttle. Will fit almost all 4-strokes. • Aluminium throttle housing. • Injection moulded throttle tube.
Quick Action Push/Pull Throttle Domino quick action push pull 4-Stroke throttle. • Aluminium throttle housing. • Injection moulded throttle tube.
• 90 0 turn throttle. • Push Pull throttle. • Includes Domino Dually Grips. Part No. 12-094
• Push Pull throttle. • 180 0 turn throttle.
Universal Push/Pull Throttle Assembly 12-039.EA Pack Of 10 Throttles 12-039.PK/10
4-Stroke Push/Pull Throttle Domino 4-Stroke push pull throttle. • Aluminium throttle housing. • Injection moulded throttle tube. • Stroke 28mm/90° - 36mm/112°. • Push Pull throttle. • Includes Domino Victor Half Waffle Grips. Part No. 12-098
180 0 MX 4-Stroke Throttle Domino 180 0 MX 4-Stroke throttle. • Aluminium throttle housing. • Injection moulded throttle tube.
• 180 0 turn throttle. • Push Pull throttle. Part No. 12-0602
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D13
Made with FlippingBook - Online magazine maker