SHOCK TOOLS
FOLDING SAG SCALE (Motion Pro) Motion Pro folding sag scale. New and improved version of the original Motion Pro folding sag scale. Can be used to check front or rear sag. New swing out design is compact and fits in most tool boxes. Adjustable zero set point for direct scale reading (no subtracting requirement). Cone shaped axle location pin fits hollow axles up to 20mm with repeatable precision. Inch and metric scales. Works on mini and full size motorcycles. Made from 6061-T6 aluminium with durable blue anodized finish and laser engraved markings. Extended length 28 3/8” (720mm) and folded length 15 3/4” (400mm).
Motion Pro Folding Sag Scale
00-012.MP
00-012.MP
00-012.MP
00-012.MP Working
SHOCK NEEDLE REMOVAL DRIVER (PSYCHIC) Psychic shock needle removal driver. Its special pin designed working for WP PDS shock body, to remove the compression needle from the shock. Fits KTM’s with White Powder PDS shocks. 15mmx 2.4mm. 72.5mm long, Hexagon 19mm, Central hole 11.5mm.
Psychic Shock Needle Removal Driver
00-8060
00-8060
SHOCK SPANNER PUNCH (Motion Pro) Motion Pro shock spanner punch. Ideal tool for turning hard to reach lock ring and pre load ring on rear shocks. Angled brass tip gives secure bite and protects ring from damage. Heavy duty construction. Long shaft to reach hard to get at shocks.
Motion Pro Shock Spanner Punch
00-7815
00-7815
Heavy Duty Pin Spanner
• Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps, and bearing retainers • Freely pivoting arms span a range of 10.5mm to 150mm • Interchangeable 3mm, 4mm, and 5mm hardened steel pins • Integrated 3/8” square drive for use with a breaker bar or torque wrench • Curved, low profile arms easily fit tight areas • Billet heat treated steel construction for increased strength, rigidity and durability
00-014_HD.MP
• Durable black oxide finish with laser engraved markings • Replacement pins available (part number 00-014_HD.PINS) • Maximum torque rating of 70 lbs-ft • Patented • Lifetime limited warranty on body of tool (warranty excludes pins)
FIR Fork Cap Remover Tool
00-014_HD.MP
Replacement Pin Set
00-014_HD.PINS
SHOCK BLADDER PULLER (FIR) FIR shock bladder puller. This tool attaches to the shock reservoir schrader valve, protecting its fine threads and making the bladder removal easy. Does not work on shocks with an angled schrader valve such as current Yamaha YZ models.
FIR Shock Bladder Puller O.D25mm (Red) FIR Shock Bladder Puller O.D19mm (Blue)
00-980.LRG.FIR 00-980.SML.FIR
00-980.LRG.FIR Working
00-980.LRG.FIR
00-980.SML.FIR
WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C21
Made with FlippingBook - Online magazine maker